How to Maintain Parking Assist Distance Sensors on 2009 Dodge Nitro?

To service parking assist distance sensors, disconnect the battery negative cable, remove the rear wheel flare, and loosen the bumper fascia. Disconnect the wire harness from the sensor, pry the sensor from its bracket, and remove the O-ring spacer. Sensors and spacers are available for replacement.

OEM 2009 Dodge Nitro Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Assist Distance Sensors found

View related parts
2009 Dodge Nitro Reverse Sensor, Black, Rear Part Number: 1AF63TZZAA
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor, Rear; Ultrasonic Sensor; Parking Sensors; Sensor; Sensor Parking Assist; Parking Aid Sensor
- Position: Rear
- Replaces: 1AF63RXFAA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1AF63TZZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Reverse Sensor, Black Part Number: 1AF63S3XAA
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor; Parking Sensors; Sensor; Sensor Parking Assist
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 1AF63S3XAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Nitro Parking Assist Distance Sensor Parts and Q&A

Q: How to Maintain Parking Assist Distance Sensors on 2009 Dodge Nitro?
A: To service parking assist distance sensors, disconnect the battery negative cable, remove the rear wheel flare, and loosen the bumper fascia. Disconnect the wire harness from the sensor, pry the sensor from its bracket, and remove the O-ring spacer. Sensors and spacers are available for replacement.