How to Install Parking Assist Distance Sensors on Dodge Nitro?

First, set the O-ring spacer at the sensor's circumference, so that the part facing the rear fascia is narrow and meets the outer part of the sensor while the wide side sits against the sensor housing. Then, connect and hold the sensor firmly in the sensor bracket at the back of the rear bumper fascia until the locks from the bracket are over both top and bottom latch tabs on the sensor, with the sensor membrane level with the external side of the fascia. Properly placing and centering each sensor membrane within the openings of the rear fascia and leaving the O-ring spacers un-pinched, are essential, since wrong centering or shredded O-rings may hamper the parking assist distance sensors. Then, join the wire harness connector once again with the one on the back of the fascia. Once finished, install the rear wheel flare and the attached bumper fascia on the same side of the car and attach the negative battery cable.

How to Maintain Parking Assist Distance Sensors on Dodge Nitro?

Parking assist distance sensors should be serviced by first unconnecting the battery negative cable. Undo the wheel flare in the back and, on the side of the car with service required, loosen the bumper fascia. From where the fascias connect to the liftgate, remove the parking assist distance sensor (3) connector from the wire harness (4). Unlock the sensor bracket (5) hook features by pulling the top and bottom hooks away. After that, take off the O-ring spacer from the bottom of the sensor membrane. If parts need to be serviced, the parking assist distance sensor and sensor spacers can be reached separately, but the sensor brackets are mounted to the rear bumper by adhesive.

OEM Dodge Nitro Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Assist Distance Sensors found

View related parts
Dodge Nitro Parking Sensor, Front Part Number: 1EW63TZZAA
$243.60 MSRP: $361.00
You Save: $117.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor, Front, Rear; Ultrasonic Sensor; Parking Sensors; Reverse Sensor; Sensor; Sensor Parking Assist Sensor Ring Use 04806229Aa; Sensor Parking Assist; Parking Aid Sensor
- Position: Front
- Replaces: 1EW63AB5AA, 1EW63FHGAA, 1EW63PR4AA, 1EW63RXFAA, 1EW631AUAA, 1EW63P76AA, 1EW631EPAA, 1EW631SCAA, 1EW63FFBAA, 1EW63FLCAA, 1EW63LAUAA, 1EW63S3XAA, 1EW631LBAA, 1EW631Z0AA, 1EW63LXTAA, 1EW631CLAA, 1EW63DX8AA, 1EW63P79AA, 1EW63LBGAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Dodge Nitro | Detonator, Heat, SE, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Reverse Sensor, Black, Rear Part Number: 1AF63TZZAA
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor, Rear; Ultrasonic Sensor; Parking Sensors; Sensor; Sensor Parking Assist; Parking Aid Sensor
- Position: Rear
- Replaces: 1AF63RXFAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Nitro | R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Reverse Sensor, Black Part Number: 1AF63S3XAA
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor; Parking Sensors; Sensor; Sensor Parking Assist
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Parking Assist Distance Sensor

Choose OEM Parking Assist Distance Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Parking Assist Distance Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Nitro Parking Assist Distance Sensor stands as an essential device that boosts parking safety together with efficiency performance in Dodge Nitro models. This system leverages sophisticated ultrasonic technology to secure reliable performance by spotting obstacles like vehicles that could endanger the driver through auditory and visual notifications near objects. The Distance Sensor of Parking Assist works across all Dodge Nitro vehicle models between 2007 and 2012 through the installation of particular sensors at 2-4 strategic bumper or grille positions for full obstacle detection. The system contains LED displays applied for distance indication which helps the driver maintain better awareness. The waterproof sensors undergo paint procedures which enable them to blend with the Dodge Nitro vehicle color scheme while preserving its original design. The advanced parking system supports tight driving situations along with reducing potential accidents which establishes itself as an indispensable capability for Dodge Nitro owners. Its key features that distinguish the Parking Assist Distance Sensor in the automotive market are its matching-integration with backup cameras together with versatile driving conditions adaptation. Through the Dodge Nitro Parking Assist Distance Sensor the automaker displays a dedicated approach to performance safety which allows drivers to park their vehicles easily and confidently.

Dodge Nitro Parking Assist Distance Sensor Parts and Q&A

Reverse Sensor, Black
1AF63S3XAA
Q: How to Install Parking Assist Distance Sensors on Dodge Nitro?
A:
First, set the O-ring spacer at the sensor's circumference, so that the part facing the rear fascia is narrow and meets the outer part of the sensor while the wide side sits against the sensor housing. Then, connect and hold the sensor firmly in the sensor bracket at the back of the rear bumper fascia until the locks from the bracket are over both top and bottom latch tabs on the sensor, with the sensor membrane level with the external side of the fascia. Properly placing and centering each sensor membrane within the openings of the rear fascia and leaving the O-ring spacers un-pinched, are essential, since wrong centering or shredded O-rings may hamper the parking assist distance sensors. Then, join the wire harness connector once again with the one on the back of the fascia. Once finished, install the rear wheel flare and the attached bumper fascia on the same side of the car and attach the negative Battery Cable.
Reverse Sensor, Black, Rear
1AF63TZZAA
Q: How to Maintain Parking Assist Distance Sensors on Dodge Nitro?
A:
Parking assist distance sensors should be serviced by first unconnecting the battery negative cable. Undo the wheel flare in the back and, on the side of the car with service required, loosen the bumper fascia. From where the fascias connect to the liftgate, remove the parking assist distance sensor (3) connector from the wire harness (4). Unlock the sensor bracket (5) hook features by pulling the top and bottom hooks away. After that, take off the O-ring spacer from the bottom of the sensor membrane. If parts need to be serviced, the parking assist distance sensor and sensor spacers can be reached separately, but the sensor brackets are mounted to the rear bumper by adhesive.