How to Install an Intake Manifold Temperature Sensor on a 5.7L V-8 Engine on 2008 Dodge Ram 3500?

The 5.7 L V-8 engine has the SST-2 installed in the front of the intake manifold temperature sensor air box plenum. Make sure to look at the O-ring on the sensor first. After that, clean the hole in the intake manifold where the sensor is attached. Set the sensor into the intake manifold and rotate it clockwise till it slides past the release tab. The last step is to put in the electrical connector.

OEM 2008 Dodge Ram 3500 Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2008 Dodge Ram 3500 Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 8 Cyl 5.7 L GAS

2008 Dodge Ram 3500 Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Install an Intake Manifold Temperature Sensor on a 5.7L V-8 Engine on 2008 Dodge Ram 3500?
A: The 5.7 L V-8 engine has the SST-2 installed in the front of the intake manifold temperature sensor air box plenum. Make sure to look at the O-ring on the sensor first. After that, clean the hole in the intake manifold where the sensor is attached. Set the sensor into the intake manifold and rotate it clockwise till it slides past the release tab. The last step is to put in the electrical connector.