How to Remove the ABS Control Module on 2008 Dodge Sprinter 2500?

In order to de-fit the Electronic Brake Control Module, disconnect the negative battery cable, ABM harness connector and de-fit the two ABM screws. Be careful not to touch sensor terminals when separating the ABM and the HCU. In case of replacement, reprogram new ABM module with a scan tool.

OEM 2008 Dodge Sprinter 2500 ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Dodge Sprinter 2500 Control Module Part Number: 68050601AA
Product Specifications
- Other Name: Module - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit
- Replaces: 68050062AA, 68026562AA, 68013570AA
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 6.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68050601AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 2500 Control Module Part Number: 68013572AA
Product Specifications
- Other Name: Module - Electronic Stability; ABS Control Module; Modulator Valve; Module Anti-Lock Brakes
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68013572AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 2500 ABS Control Module Parts and Q&A

Q: How to Remove the ABS Control Module on 2008 Dodge Sprinter 2500?
A: In order to de-fit the Electronic Brake Control Module, disconnect the negative battery cable, ABM harness connector and de-fit the two ABM screws. Be careful not to touch sensor terminals when separating the ABM and the HCU. In case of replacement, reprogram new ABM module with a scan tool.