How to Install a Leaf Spring Shackle on 2008 Dodge Sprinter 2500?

To install the spring shackle (8), attach it to the spring (2) and tighten the nuts (5) and bolts (6) per the torque chart. Raise the rear axle (10) to connect the shackle to the spring bracket, tightening to 90 Nm (SRW) or 185 Nm (DRW), then lower the vehicle.

OEM 2008 Dodge Sprinter 2500 Leaf Spring Shackle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Leaf Spring Shackles found

View related parts
2008 Dodge Sprinter 2500 Shackle, Rear Part Number: 5118655AA
Product Specifications
- Other Name: Shackle - Spring; Leaf Spring Bracket, Rear; Leaf Spring Shackle, Rear; Shackle Spring; Leaf Spring Shackle
- Position: Rear
- Item Weight: 5.40 Pounds
- Item Dimensions: 6.1 x 4.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5118655AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 2500 Plate, Rear Part Number: 68013793AA
Product Specifications
- Other Name: Shackle - Spring; Leaf Spring Shackle, Rear; Leaf Spring Plate, Rear; Shackle; Shackle Spring; Leaf Spring Shackle
- Position: Rear
- Item Weight: 3.70 Pounds
- Item Dimensions: 5.5 x 2.3 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68013793AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 2500 Leaf Spring Shackle Parts and Q&A

Q: How to Install a Leaf Spring Shackle on 2008 Dodge Sprinter 2500?
A: To install the spring shackle (8), attach it to the spring (2) and tighten the nuts (5) and bolts (6) per the torque chart. Raise the rear axle (10) to connect the shackle to the spring bracket, tightening to 90 Nm (SRW) or 185 Nm (DRW), then lower the vehicle.