OEM 2008 Dodge Viper Clock Spring

2008 Dodge Viper Clock Spring Parts and Q&A

• Q: How to Install a Clock Spring Assembly on 2008 Dodge Viper?

  A: The first step is to connect the Clock Spring assembly to the multi-function switch, checking the latches are opened. After that, join the Clock Spring to the instrument panel harness, verifying that the wires are correctly routed and that all connectors and locking tabs are in place, with the halo lamp wire sitting properly. Fit the steering column shrouds, so that all the wires are guarded by them. When installing the steering wheel, bring both lead cables through the big hole while keeping the Clock Spring's flat spots together. Connect the two leads, from the horn and driver air bag, to the air bag before installing the driver air bag. You should not hook up the negative cable on the battery until you complete the system check to prevent serious or fatal harm. After that, fasten the battery access cover with bolts and close the deck lid.