OEM 2008 Dodge Viper Fuel Rail

2008 Dodge Viper Fuel Rail Parts and Q&A

• Q: How to remove the Fuel Rail on 2008 Dodge Viper?

  A: Before disconnecting the fuel rail, you should disconnect the negative battery cable at the battery. Eliminate the fuel system's pressure. After that, remove the air cleaner assembly. Unplug the electrical wire that goes to the MAP sensor. Tighten the hose clamp over the hose and then remove the vacuum hose from its connection with the intake manifold nipple. Remove the clips along the electrical connector harnesses from the throttle bodies and then disconnect the electrical connectors. Use the fuel line disconnect tool with a 3/8 size and separate the fuel line from the fuel rail assembly, next, unlink the fuel injector connector from every injector. Take out the intake manifold, then remove all the bolts from the fuel rail. After that, lift the fuel rail and the injectors out of the cylinder heads and take out the injectors from the rail.