How to Service and Repair an Ignition Coil on 2009 Dodge Viper?

Before starting any repair or service on the ignition coil, cut off the negative battery cable. Subsequently, get rid of the cover from the ignition coil, then simply twist the ignition cable and pull it out from the ignition coil. Unconnect the electrical wire at the ignition coil, then remove the two bolts that are holding the ignition coil. After that, remove the bolts along with the ignition coil from the valve cover.

OEM 2009 Dodge Viper Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2009 Dodge Viper Ignition Coil Part Number: 5037127AB
$62.72 MSRP: $94.05
You Save: $31.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Coil Ignition
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.0 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037127AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Ignition Coil Part Number: 68027788AC
Product Specifications
- Other Name: Cable Package - Ignition; Spark Plug Wire Set; Spark Plug Wire; Cable Assembly; Cable Set
- Replaces: 68027788AB, 68027788AA
- Item Weight: 1.90 Pounds
- Item Dimensions: 14.7 x 8.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027788AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS, 8.4L V10

2009 Dodge Viper Ignition Coil Parts and Q&A

Q: How to Service and Repair an Ignition Coil on 2009 Dodge Viper?
A: Before starting any repair or service on the ignition coil, cut off the negative battery cable. Subsequently, get rid of the cover from the ignition coil, then simply twist the ignition cable and pull it out from the ignition coil. Unconnect the electrical wire at the ignition coil, then remove the two bolts that are holding the ignition coil. After that, remove the bolts along with the ignition coil from the valve cover.