How to Remove and Service an Ignition Coil on Dodge Viper?

The first thing to do when servicing or repairing the ignition coil is to take off and handle separately the cable connected to the negative battery terminal. After that, take out the intake manifold. After that, remove the electrical connector between the ignition capacitor and the circuit. Then, loosen the sensor bolt and remove the ignition capacitor on the engine block.

How to Install an Ignition Coil on Dodge Viper?

Attach the ignition coil to the valve cover and, after that, hand-tighten the bolts using 7 Nm of torque (62 in. lbs.). After that, attach and fasten the electrical connector to the ignition coil and then firmly connect the ignition cable to the ignition coil. Clean the ignition coil cover bolts and then put Mopar(R) Lock & Seal Adhesive on them. Then, install the ignition coil cover and tighten the bolts to a value of 12 Nm or 106 in. lbs. Lastly, link the negative battery cable and secure it with a nut that has a torque of 10 Nm (90 in. lbs.).

OEM Dodge Viper Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Coils found

View related parts
Dodge Viper Ignition Coil Part Number: 5037127AB
$62.72 MSRP: $94.05
You Save: $31.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Coil Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017, 2008-2010 Dodge Viper | ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Ignition Coil Part Number: 56032521AC
$159.45 MSRP: $243.00
You Save: $83.55 (35%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil
- Replaces: 56032521AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Dodge Viper | ACR, GT2, GTS, R/T-10, SRT-10 | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Viper Ignition Coil Part Number: 56029098AB
$88.04 MSRP: $195.00
You Save: $106.96 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56029098AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Dodge Viper | ACR, GT2, GTS, R/T-10, SRT-10 | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Viper Ignition Coil Part Number: 68027788AC
Product Specifications
- Other Name: Cable Package - Ignition; Spark Plug Wire Set; Spark Plug Wire; Cable Assembly; Cable Set
- Replaces: 68027788AB, 68027788AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS, 8.4L V10

Dodge Viper Ignition Coil

Choose OEM Ignition Coil that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ignition Coil follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Ignition Coil is another indispensably recognized component highly valued for its dependability, specifically in boosting the performance of the ignition systems in several models of Dodge Viper. This Ignition Coil effectively steps down voltage directly from the battery to the high rate that is wanted for burning the air/fuel mixture in the engine pistons, for better combustion and performance. Constructed from high quality material, with copper wire coils that are encapsulated by an iron core, the Ignition Coil can work with any other ignition types, whether it is the distributor ignition or the coil on plug kind dedicated for specific Viper models. Failure of the Ignition Coil in the Dodge Viper causes the engine to misfire and less efficiency in the usage of fuel; hence it needs constant checking and replacing if necessary. Ignition Coil has more than the features, as it contributes towards the performance and handling of the vehicle, by maintaining a smooth operation of the engine and its sensitivity. Apart from this, it boasts a long product life with excellent build quality hence becoming a preferred option when it comes to the viper. The Dodge Viper responding to the rivalry's signature analogue design and enhanced V10 vehicle engine, is even enhanced by the reliability of ignition coil. Therefore it can be concluded that the Ignition Coil is an integral factor that enlarges accessibility, security, and power, which makes the Ignition Coil crucial for any Viper automobile owner.

Dodge Viper Ignition Coil Parts and Q&A

Ignition Coil
5037127AB
Q: How to Remove and Service an Ignition Coil on Dodge Viper?
A:
The first thing to do when servicing or repairing the ignition coil is to take off and handle separately the cable connected to the negative battery terminal. After that, take out the Intake Manifold. After that, remove the electrical connector between the ignition capacitor and the circuit. Then, loosen the sensor bolt and remove the ignition capacitor on the engine block.
Ignition Coil
68027788AC
Q: How to Install an Ignition Coil on Dodge Viper?
A:
Attach the ignition coil to the valve cover and, after that, hand-tighten the bolts using 7 Nm of torque (62 in. lbs.). After that, attach and fasten the electrical connector to the ignition coil and then firmly connect the ignition cable to the ignition coil. Clean the ignition coil cover bolts and then put Mopar(R) Lock & Seal Adhesive on them. Then, install the ignition coil cover and tighten the bolts to a value of 12 Nm or 106 in. lbs. Lastly, link the negative Battery Cable and secure it with a nut that has a torque of 10 Nm (90 in. lbs.).