How to Repair and Service an Ignition Switch on 2008 Dodge Viper?

The first step to fixing or repairing the ignition switch is to isolate the negative battery cable from the battery. Then, according to the instructions for the body and frame, take out the center bezel in the interior moulding and trim on the dashboard and instrument panel. When the center bezel is removed, pinch the tabs on the switch and afterward, pull the switch out of the bezel.

OEM 2008 Dodge Viper Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2008 Dodge Viper Ignition Switch Part Number: 4685719AI
$67.84 MSRP: $94.40
You Save: $26.56 (29%)
ADD TO CART
Product Specifications
- Other Name: Switch - Ignition; Ignition Lock Cylinder; Ignition Cylinder; Switch Ignition
- Replaces: 4685719AC, 4685719AE, 4685719AD, 68033393AA, 4685719AH, 4685719AB, 4685719AG, 4685719AF
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 3.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
2008 Dodge Viper Ignition Switch Part Number: 4865676AC
Product Specifications
- Other Name: Switch - Ignition; Switch Ignition
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Ignition Switch Parts and Q&A

Q: How to Repair and Service an Ignition Switch on 2008 Dodge Viper?
A: The first step to fixing or repairing the ignition switch is to isolate the negative battery cable from the battery. Then, according to the instructions for the body and frame, take out the center bezel in the interior moulding and trim on the dashboard and instrument panel. When the center bezel is removed, pinch the tabs on the switch and afterward, pull the switch out of the bezel.