How to Install an Ignition Switch in the Center Bezel on 2009 Dodge Viper?

You should insert the ignition switch into the center bezel as your first step. Following that, put the center bezel in place, as directed in the Body and Frame/Interior Moulding/Trim/Dashboard/Instrument Panel/Service and Repair/Instrument Panel Bezel - Installation. After that, attach the negative cable and tighten it to 10 Nm (90 in. lbs.).

OEM 2009 Dodge Viper Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
2009 Dodge Viper Ignition Switch Part Number: 4685719AI
$67.84 MSRP: $94.40
You Save: $26.56 (29%)
ADD TO CART
Product Specifications
- Other Name: Switch - Ignition; Ignition Lock Cylinder; Ignition Cylinder; Switch Ignition
- Replaces: 4685719AC, 4685719AE, 4685719AD, 68033393AA, 4685719AH, 4685719AB, 4685719AG, 4685719AF
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 3.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
2009 Dodge Viper Ignition Switch Part Number: 4865676AC
Product Specifications
- Other Name: Switch - Ignition; Switch Ignition
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper Ignition Switch Parts and Q&A

Q: How to Install an Ignition Switch in the Center Bezel on 2009 Dodge Viper?
A: You should insert the ignition switch into the center bezel as your first step. Following that, put the center bezel in place, as directed in the Body and Frame/Interior Moulding/Trim/Dashboard/Instrument Panel/Service and Repair/Instrument Panel Bezel - Installation. After that, attach the negative cable and tighten it to 10 Nm (90 in. lbs.).