How to Service and Repair Lash Adjusters on 2008 Dodge Viper?

To work on a lash adjuster, first lubricate the tappet and make sure it is returning to its original position so that the yoke's "handle" faces toward the intake manifold. After that, put in the aligning yoke assemblies and add Mopar(R) Lock & Seal Adhesive to the screws before tightening to 11 Nm (95 in. lbs.). Always give the lash adjusters time to become quiet by idling the engine and never revving it up too much until you see they are quiet. After that, fit the cylinder heads.

OEM 2008 Dodge Viper Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2008 Dodge Viper Ignition Lock Cylinder Part Number: 5004042AB
$270.89 MSRP: $343.40
You Save: $72.51 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Hydraulic Roller; Valve Lifter; Manifold Gasket; Valve Lifters
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5004042AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, GTS, R/T-10, SRT-10, SRT-10 ACR | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Lash Adjuster Parts and Q&A

Q: How to Service and Repair Lash Adjusters on 2008 Dodge Viper?
A: To work on a lash adjuster, first lubricate the tappet and make sure it is returning to its original position so that the yoke's "handle" faces toward the intake manifold. After that, put in the aligning yoke assemblies and add Mopar(R) Lock & Seal Adhesive to the screws before tightening to 11 Nm (95 in. lbs.). Always give the lash adjusters time to become quiet by idling the engine and never revving it up too much until you see they are quiet. After that, fit the cylinder heads.