How to Service and Repair an Axle Shaft on 2008 Jeep Commander?

Services and repairs on the axle shaft start by putting the car in neutral and placing it on a hoist. Remove the caliper and wheel rotor first and then take away the two speed sensors that are on the end of the axle tube flange. After that, remove the nuts from the axle flange using a wrench. Pull the axle shaft and backing plate out of the axle tube until the axle bearing becomes visible, then remove the O-ring from that bearing. Shift the axle shaft from the tube and backing plate, then use a hammer and brass drift to tap it through the bearing and axle flange using the plug hole.

OEM 2008 Jeep Commander Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Axle Shafts found

View related parts
2008 Jeep Commander Axle Assembly, Front Driver Side Part Number: 52104591AB
$439.74 MSRP: $668.00
You Save: $228.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: 52104591AA
- Item Weight: 17.30 Pounds
- Item Dimensions: 31.5 x 8.1 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104591AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Assembly, Front Passenger Side Part Number: 52104590AA
$436.15 MSRP: $639.00
You Save: $202.85 (32%)
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Item Weight: 16.90 Pounds
- Item Dimensions: 26.6 x 3.8 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104590AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 5183529AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 15.30 Pounds
- Item Dimensions: 33.7 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183529AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Front Part Number: 52111347AB
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111347AC
- Item Weight: 7.00 Pounds
- Item Dimensions: 24.2 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111347AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Rear Passenger Side Part Number: 5183528AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Passenger Side
- Item Weight: 14.00 Pounds
- Item Dimensions: 33.3 x 3.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183528AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Assembly, Front Driver Side Part Number: 52104701AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: RL104701AB
- Item Weight: 18.60 Pounds
- Item Dimensions: 40.4 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104701AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52111913AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 13.60 Pounds
- Item Dimensions: 37.9 x 15.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111913AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52114077AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 13.10 Pounds
- Item Dimensions: 35.7 x 6.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114077AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Front Part Number: 52111969AC
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111969AB, 52111969AD
- Item Weight: 6.40 Pounds
- Item Dimensions: 19.8 x 4.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111969AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52111899AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 12.90 Pounds
- Item Dimensions: 37.1 x 4.2 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111899AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52114076AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 14.00 Pounds
- Item Dimensions: 39.9 x 5.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114076AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Axle Shaft Parts and Q&A

Q: How to Service and Repair an Axle Shaft on 2008 Jeep Commander?
A: Services and repairs on the axle shaft start by putting the car in neutral and placing it on a hoist. Remove the caliper and wheel rotor first and then take away the two speed sensors that are on the end of the axle tube flange. After that, remove the nuts from the axle flange using a wrench. Pull the axle shaft and backing plate out of the axle tube until the axle bearing becomes visible, then remove the O-ring from that bearing. Shift the axle shaft from the tube and backing plate, then use a hammer and brass drift to tap it through the bearing and axle flange using the plug hole.