How to Properly Install an Axle Shaft on 2007 Jeep Commander?

Before installing the axle shaft, tighten the loose bearing flange stud to 27 Nm (20 ft. lbs.). Tap the axle shaft into both the axle bearing and the axle flange. After that, slide the axle shaft (1) into the axle tube and backing plate and add a new O-ring around the axle. Slip O-ring (2) onto the back of the plate and push the axle through so that bearing (1) comes through the front. Set one O-ring (2) on the axle bearing and place the axle in the axle tube until it clicks. Secure each axle (2) flange nut (1) by tightening it to 119 Nm (88 ft. lbs.). Followed by this, fit the speed sensors (2) onto the ends of the axle tube (1). Now, put Mopar(R) Stud N' Bearing Mount Adhesive or a similar compound on the newly fitted plug, install it using the freeze plug tool and fit the calipers and rotors.

OEM 2007 Jeep Commander Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Axle Shafts found

View related parts
2007 Jeep Commander Axle Assembly, Front Driver Side Part Number: 52104591AB
$439.74 MSRP: $668.00
You Save: $228.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: 52104591AA
- Item Weight: 17.30 Pounds
- Item Dimensions: 31.5 x 8.1 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104591AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Assembly, Front Passenger Side Part Number: 52104590AA
$436.15 MSRP: $639.00
You Save: $202.85 (32%)
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Item Weight: 16.90 Pounds
- Item Dimensions: 26.6 x 3.8 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104590AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 5183529AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 15.30 Pounds
- Item Dimensions: 33.7 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183529AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Front Part Number: 52111347AB
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111347AC
- Item Weight: 7.00 Pounds
- Item Dimensions: 24.2 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111347AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Rear Passenger Side Part Number: 5183528AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Passenger Side
- Item Weight: 14.00 Pounds
- Item Dimensions: 33.3 x 3.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183528AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Assembly, Front Driver Side Part Number: 52104701AB
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: RL104701AB
- Item Weight: 18.60 Pounds
- Item Dimensions: 40.4 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104701AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52111913AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 13.60 Pounds
- Item Dimensions: 37.9 x 15.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111913AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52114077AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 13.10 Pounds
- Item Dimensions: 35.7 x 6.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114077AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Front Part Number: 52111969AC
Product Specifications
- Other Name: Shaft - Axle; Drive Axle Shaft, Front; Axle Shafts; Shaft Axle
- Position: Front
- Replaces: 52111969AB, 52111969AD
- Item Weight: 6.40 Pounds
- Item Dimensions: 19.8 x 4.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111969AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52111899AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 12.90 Pounds
- Item Dimensions: 37.1 x 4.2 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111899AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Axle Shaft, Rear Driver Side Part Number: 52114076AA
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left, Rear Right; Axle Shafts; Shaft Axle Rear; Shaft Axle
- Position: Rear Driver Side
- Item Weight: 14.00 Pounds
- Item Dimensions: 39.9 x 5.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114076AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Axle Shaft Parts and Q&A

Q: How to Properly Install an Axle Shaft on 2007 Jeep Commander?
A: Before installing the axle shaft, tighten the loose bearing flange stud to 27 Nm (20 ft. lbs.). Tap the axle shaft into both the axle bearing and the axle flange. After that, slide the axle shaft (1) into the axle tube and backing plate and add a new O-ring around the axle. Slip O-ring (2) onto the back of the plate and push the axle through so that bearing (1) comes through the front. Set one O-ring (2) on the axle bearing and place the axle in the axle tube until it clicks. Secure each axle (2) flange nut (1) by tightening it to 119 Nm (88 ft. lbs.). Followed by this, fit the speed sensors (2) onto the ends of the axle tube (1). Now, put Mopar(R) Stud N' Bearing Mount Adhesive or a similar compound on the newly fitted plug, install it using the freeze plug tool and fit the calipers and rotors.