How to Install a Shift Cable on 2008 Jeep Commander?

Installation of the gearshift cable is required, to pass it through the dash panel to the shifter assembly, install the grommet, and install the retainer. Dress the cable on the pin at the shift lever, ensure the transmission is PARK and tighten the adjusting nut. Fit the parts of the console and dash back together.

OEM 2008 Jeep Commander Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shift Cables found

View related parts
2008 Jeep Commander Control Cable Part Number: 68003121AC
Product Specifications
- Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable; Shift Control Cable; Cable Gearshift Control
- Replaces: 68003121AA, 68003121AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 18.6 x 17.9 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003121AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Limited, Overland, Sport | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Shift Control Cable Part Number: 68003138AC
Product Specifications
- Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable; Cable Gearshift Control
- Replaces: 68003138AA, 68003138AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.8 x 14.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003138AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Sport | 3.7L V6

2008 Jeep Commander Shift Cable Parts and Q&A

Q: How to Install a Shift Cable on 2008 Jeep Commander?
A: Installation of the gearshift cable is required, to pass it through the dash panel to the shifter assembly, install the grommet, and install the retainer. Dress the cable on the pin at the shift lever, ensure the transmission is PARK and tighten the adjusting nut. Fit the parts of the console and dash back together.