OEM Jeep Commander Shift Cable

Jeep Commander Shift Cable Parts and Q&A

• Control Cable
  52109667AE
  Q: How to Install and Adjust a Shift Cable for Proper Functionality on Jeep Commander?

  A:

  Before you install the shift interlock cable, first make sure the ignition key is in the ACC position. After that, put the park lock cable through the ignition lock and anchor it inside the instrument retainer. Replace the removed instrumental panel trim when you are finished. After removing the inner shifter cover, feed the park lock cable to join the shift mechanism. Then, join the park lock cable's core to the shift mechanism cam and secure its housing. Change the park lock cable to suit your needs. Should it be required, place a shield over the gearshift and park lock cables, attach it to the shifter assembly and secure it with bolts. The final step is to fit the floor console assembly.
• Control Cable
  68003121AC
  Q: How to Remove a Shift Cable on Jeep Commander?

  A:

  Begin by turning the transmission into PARK and lifting the car before taking out the shift cable. Take the gearshift cable eyelet off the manual shift lever at the transmission and pull the cable out of the brackets. By lowering the vehicle and getting rid of the console, you can move to the shift mechanism and cabling area. Take the shield off only if you need to. The bolts have to be removed from the shifter assembly as well. After that, detach the gearshift cable from the shift lever pin and take the retainer out of the shifter assembly hole. From the engine compartment, remove the grommet under the dash, then withdraw the gearshift cable from the car.