How to Maintain and Repair an Automatic Transmission Filter on 2008 Jeep Commander?

For the fluid filter repair or service, begin by driving the car with an idling engine until the transmission oil temperature goes up. After that, support and lift the vehicle. Get rid of the five bolts and the four retainers that attach the oil pan to the transmission, after which remove the oil pan and gasket. After that, remove the transmission oil filter and o-ring inside the electrohydraulic control unit. Pull out anything inside the oil pan and check the gasket for damage; you may want to buy a fresh one if necessary. Put a new oil filter and o-ring into the electrohydraulic control unit and then attach the oil pan and gasket to the transmission. Use the retainers and bolts to hold the oil pan in place and be sure to torque each bolt to 8 Nm (70 in.lbs.). Lower the vehicle, add 5.0 L (10.6 pts.) of fluid to the transmission and check the oil level.

OEM 2008 Jeep Commander Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Filters found

View related parts
2008 Jeep Commander Oil Filter Part Number: 5015267AD
$51.86 MSRP: $77.10
You Save: $25.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: 4X2 Filter - Transmission Oil; Transmission Filter; Hydraulic Filter; Filter
- Replaces: 5015267AC
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.4 x 5.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Oil Pan Part Number: 52108325AA
$44.65 MSRP: $60.85
You Save: $16.20 (27%)
ADD TO CART
Product Specifications
- Other Name: Filter - Transmission Oil; Hydraulic Filter, Automatic Transmission; Fluid Kit; Oil Filter; Filter; Filter Transmission Oil
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.3 x 4.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52108325AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Commander Oil Filter Part Number: 5179267AD
$37.41 MSRP: $54.00
You Save: $16.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Filter Package - Transmission Oil; Transmission Filter; Transmission Filter Kit; Hydraulic Filter; Filter; Filter Package Transmission Oil
- Replaces: 5179267AC, 4799662AB, 5179267AA, 5179267AB, 4799662AC, 4799662
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.2 x 3.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Automatic Transmission Filter Parts and Q&A

Q: How to Maintain and Repair an Automatic Transmission Filter on 2008 Jeep Commander?
A: For the fluid filter repair or service, begin by driving the car with an idling engine until the transmission oil temperature goes up. After that, support and lift the vehicle. Get rid of the five bolts and the four retainers that attach the oil pan to the transmission, after which remove the oil pan and gasket. After that, remove the transmission oil filter and o-ring inside the electrohydraulic control unit. Pull out anything inside the oil pan and check the gasket for damage; you may want to buy a fresh one if necessary. Put a new oil filter and o-ring into the electrohydraulic control unit and then attach the oil pan and gasket to the transmission. Use the retainers and bolts to hold the oil pan in place and be sure to torque each bolt to 8 Nm (70 in.lbs.). Lower the vehicle, add 5.0 L (10.6 pts.) of fluid to the transmission and check the oil level.