How to Replace an HVAC Pressure Switch on 2008 Jeep Compass?

To replace the HVAC pressure switch, disconnect the negative battery cable, then pull the fascia forward to access the switch. Disconnect the wire harness from the switch on the A/C discharge line, and finally, remove the switch and discard the O-ring seal.

OEM 2008 Jeep Compass HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 HVAC Pressure Switches found

View related parts
2008 Jeep Compass Pressure Switch Part Number: 5174039AB
$115.67 MSRP: $172.00
You Save: $56.33 (33%)
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches; Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.
- Replaces: 5175684AA, 5189363AA, 5096084AA, 5174039AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 1.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174039AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Compass Submodels:
- Base, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Jeep Compass Check Valve Part Number: 5189373AA
$31.31 MSRP: $31.95
You Save: $0.64 (2%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Service Valve; Line Valve; Liquid Line Valve; Valve Core A/C Line
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189373AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Jeep Compass Submodels:
- Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Jeep Compass HVAC Pressure Switch Parts and Q&A

Q: How to Replace an HVAC Pressure Switch on 2008 Jeep Compass?
A: To replace the HVAC pressure switch, disconnect the negative battery cable, then pull the fascia forward to access the switch. Disconnect the wire harness from the switch on the A/C discharge line, and finally, remove the switch and discard the O-ring seal.