How to Install and Service an EGR Valve on 2008 Jeep Grand Cherokee?

First, hold the EGR Airflow Valve in position and bolt it with the specific bolts and then continue by putting in the IAT Sensor Housing and its retaining bolts. After that, put the Fuel Line Support and the IAT Sensor Housing Bracket in place with bolts. Link the EGR Tube to the Charge Air Crossover Manifold which is set ahead of the Intake Manifolds and attach the EGR Airflow Valve and IAT harness wires together again. After that, put in the Vacuum Pump, lower Turbocharger Intercooler Flex Hose and the Turbocharger Intercooler Tube. Install these three components next: Engine Cover Support Brace, Air Filter Housing and Intake Tube and then put the Engine Cover on the top. Finish the installation process by connecting back the Negative Battery Cable.

OEM 2008 Jeep Grand Cherokee EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 EGR Valves found

View related parts
2008 Jeep Grand Cherokee EGR Valve Part Number: 53034192AB
$292.31 MSRP: $434.00
You Save: $141.69 (33%)
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve; Valve EGR
- Replaces: 53034192AA, 53032948AD, 53032948AC
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.2 x 4.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53034192AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Grand Cherokee EGR Valve Part Number: 53032509AN
$352.91 MSRP: $495.00
You Save: $142.09 (29%)
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve; Exhaust Gas Recirculation Valve
- Replaces: 53032509AI, 53032509AF, 53032209AE, 53032509AJ, 53032509AM, 53032509AL, 53032509AG, 53032509AH
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.9 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032509AN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Grand Cherokee Submodels:
- Limited, Overland | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Grand Cherokee Valve - EGR Part Number: CNHNX631AA
$57.05 MSRP: $83.95
You Save: $26.90 (33%)
ADD TO CART
Product Specifications
- Other Name: VALVE-EGR
- Item Weight: 2.70 Pounds
- Item Dimensions: 6.6 x 6.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CNHNX631AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Jeep Grand Cherokee EGR Valve Part Number: 68057479AA
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve
- Replaces: 68012312AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.4 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68057479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland | 3.0L V6

2008 Jeep Grand Cherokee EGR Valve Parts and Q&A

Q: How to Install and Service an EGR Valve on 2008 Jeep Grand Cherokee?
A: First, hold the EGR Airflow Valve in position and bolt it with the specific bolts and then continue by putting in the IAT Sensor Housing and its retaining bolts. After that, put the Fuel Line Support and the IAT Sensor Housing Bracket in place with bolts. Link the EGR Tube to the Charge Air Crossover Manifold which is set ahead of the Intake Manifolds and attach the EGR Airflow Valve and IAT harness wires together again. After that, put in the Vacuum Pump, lower Turbocharger Intercooler Flex Hose and the Turbocharger Intercooler Tube. Install these three components next: Engine Cover Support Brace, Air Filter Housing and Intake Tube and then put the Engine Cover on the top. Finish the installation process by connecting back the Negative Battery Cable.