OEM 2008 Jeep Grand Cherokee Vapor Canister

2008 Jeep Grand Cherokee Vapor Canister Parts and Q&A

• Q: How to Install a Vapor Canister with an NVLD Pump on 2008 Jeep Grand Cherokee?

  A: You should put an o-ring into the NVLD pump before installing it onto the EVAP canister. After that, adjust the NVLD pump so that the tab falls in place in the notch of the EVAP canister. Place the EVAP canister into the bracket and attach the two nuts that hold it securely to the bracket. After that, hold the canister/pump mold at the body and tightly fasten the three bracket-to-body nuts. Gently fit the vapor/vacuum lines to the NVLD pump and EVAP canister, making sure they're tightly sealed. Look at the vapor/vacuum lines near the NVLD, filter and EVAP purge solenoid for any damage, as a leak here can cause the car's computer to set a Diagnostic Trouble Code. Attach the electrical connector to the pump, install the shield over the left-rear tire and last, put the left-rear tire into place.