Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Jeep Grand Cherokee Wheel Bearing

Hub Bearing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Bearing found

  • 2008 Jeep Grand Cherokee Wheel Bearing - 52111884AB
    2008 Jeep Grand Cherokee Wheel Bearing Diagram - 52111884AB
    View related parts

    2008 Jeep Grand Cherokee Hub & Bearing, Rear Part Number: 52111884AB

    $329.29 MSRP: $497.00
    You Save: $167.71 (34%)
    ADD TO CART
    Product Specifications
    • Other Name: Hub & Bearing - Wheel; Rear Wheel Bearing and Hub Assembly; Repair Kit; Assembly; Bearing Kit.; Hub And Bearing Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing
    • Position: Rear
    • Replaces: 52111884AA
    • Item Weight: 13.20 Pounds
    • Item Dimensions: 8.4 x 7.5 x 7.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52111884AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Jeep Grand Cherokee Submodels:
    • 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Jeep Grand Cherokee Wheel Bearing Parts and Q&A

  • Q: How to Service and Repair a Wheel Bearing on 2008 Jeep Grand Cherokee?
    A: Service or repair of the axle bearing should be done by first hoisting the car with it in neutral. Removal of the calipers and rotors should be your first step. After that, hit the axle end plug with a hammer and punch to loosen it from the wheel flange and then remove it. Take off both sets of sensors from the axle tube flange and also remove the nuts that secure the axle flange. Extract the axle shaft and backing plate from the axle tube until the axle bearing is visible and then take out the O-ring from the axle bearing. Disconnect the axle shaft from the axle tube and backing plate and after that, hammer and drift the axle shaft out of the wheel flange and the axle bearing through the plug hole.

Related 2008 Jeep Grand Cherokee Parts

Alternate Year Models

+
2007 Jeep Grand Cherokee Wheel Bearing 2009 Jeep Grand Cherokee Wheel Bearing