How to Install an Oil Pressure Switch on 2008 Jeep Patriot?

In order to install the engine oil pressure sensor, a new one is needed in case of removal. Do not tighten too much and crack the engine block. Install oil pressure socket C-4597 and fasten to a tight of 8 Nm (71 in. lbs.), and wire the connector.

OEM 2008 Jeep Patriot Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Jeep Patriot Oil Pressure Sending Unit Part Number: 68003360AA
$32.96 MSRP: $49.15
You Save: $16.19 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Switch Package Oil Pressure; Oil Pressure Switch
- Replaced by: 68003360AC
- Replaces: 5033317AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003360AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Jeep Patriot Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2008 Jeep Patriot?
A: In order to install the engine oil pressure sensor, a new one is needed in case of removal. Do not tighten too much and crack the engine block. Install oil pressure socket C-4597 and fasten to a tight of 8 Nm (71 in. lbs.), and wire the connector.