Other Name: Arm - Lower Control; Suspension Control Arm, Front Lower; Arm Lower Control Front; Suspension Control Arm; Control Arm
Position: Front Lower
Replaces: 52059979AD, 52059979AC, 52059979AE
Item Weight: 7.00 Pounds
Item Dimensions: 2.3 x 3.2 x 25.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52059979AF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
2008 Jeep Wrangler Control Arm Parts and Q&A
Q: How to Install the Rear Upper Control Arm on 2008 Jeep Wrangler?
A: Position the paint dot at the top of the control arm towards the axle and facing toward the outside; if the dot is not there, make sure the end that is bent least times and the shortest end go to the axle side. Stick the upper suspension arm into the axle bracket and frame rail mount and then mount the bolt loosely with your fingers. After removing the support, lower the vehicle and tighten the upper arm bolts to 169 Nm (125 ft. lbs.) as you are applying the vehicle's weight.