How to Service and Repair a Sway Bar Bushing on 2008 Jeep Wrangler?

Start by lifting and supporting your car before dealing with the sway bar bushing. After removing the left upper sway bar link nut, disconnect the left lower sway bar bolt to the axle which allows you to remove just the sway bar from the right side link. After that, take out the right upper sway bar link nut and remove the splash shield. Unbolt the three sway bar bracket bolts on the right side and the same three on the left side securing them to the frame, one at a time. When the sway bar (1) is free, set it on a bench and open the retaining tabs (1) in the bracket. If the tabs snap, that's fine as they are only for factory fitment. After that, remove the bracket (2), then soak each bushing (3) with soapy water and pull it off the sway bar.

OEM 2008 Jeep Wrangler Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Bushings found

View related parts
2008 Jeep Wrangler Stabilizer Bar Bushing, Rear Part Number: 52060013AA
$11.58 MSRP: $17.30
You Save: $5.72 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 2.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52060013AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X, X-S | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Jeep Wrangler Stabilizer Bar Bushing, Front Part Number: 52059973AC
$23.32 MSRP: $34.65
You Save: $11.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing Kit.; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 52060299AD
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.6 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059973AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X, X-S | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Jeep Wrangler Stabilizer Bar Bushing, Rear Part Number: 52060012AC
$12.71 MSRP: $18.75
You Save: $6.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Rear Suspension Bushing Kit; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.8 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52060012AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X, X-S | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS

2008 Jeep Wrangler Sway Bar Bushing Parts and Q&A

Q: How to Service and Repair a Sway Bar Bushing on 2008 Jeep Wrangler?
A: Start by lifting and supporting your car before dealing with the sway bar bushing. After removing the left upper sway bar link nut, disconnect the left lower sway bar bolt to the axle which allows you to remove just the sway bar from the right side link. After that, take out the right upper sway bar link nut and remove the splash shield. Unbolt the three sway bar bracket bolts on the right side and the same three on the left side securing them to the frame, one at a time. When the sway bar (1) is free, set it on a bench and open the retaining tabs (1) in the bracket. If the tabs snap, that's fine as they are only for factory fitment. After that, remove the bracket (2), then soak each bushing (3) with soapy water and pull it off the sway bar.