How to Install the Front Fender Liner in Your Wheelhouse on 2008 Jeep Wrangler?

You should first attach the front wheel house liner to the front wheel house opening when installing the front fender liner. Later, attach the wheel speed sensor harness (1) to the wheel house liner. Install the liner of the wheel house using push/pins (6) and (9), then put in all bolts (7) and tighten them according to the instructions. Make sure to install the already-torqued wheel and tire after brake removal. Install the splash guard (2) first, attaching it by screws. Then, securely attach the splash shield (2) with push pin fasteners (4) and finally place the flare molding rivets (2) in place.

OEM 2008 Jeep Wrangler Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheelhouses found

View related parts
2008 Jeep Wrangler Wheelhouse Liner, Rear Passenger Side Part Number: 55157126AK
$104.29 MSRP: $155.00
You Save: $50.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Right; Fender Splash Shield; Shield Splash Rear
- Position: Rear Passenger Side
- Replaces: 55157126AH, 55157126AD, 55157126AE, 55157126AJ, 55157126AC, 55157126AF, 55157126AG, 55157126AI
- Item Weight: 3.10 Pounds
- Item Dimensions: 46.8 x 25.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157126AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Jeep Wrangler Wheelhouse Liner, Rear Driver Side Part Number: 55157127AK
$104.29 MSRP: $155.00
You Save: $50.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Left; Fender Splash Shield; Shield Splash Rear
- Position: Rear Driver Side
- Replaces: 55157127AE, 55157127AD, 55157127AH, 55157127AG, 55157127AF, 55157127AI, 55157127AJ, 55157127AC
- Item Weight: 5.30 Pounds
- Item Dimensions: 44.3 x 18.2 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157127AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2008 Jeep Wrangler Wheelhouse Parts and Q&A

Q: How to Install the Front Fender Liner in Your Wheelhouse on 2008 Jeep Wrangler?
A: You should first attach the front wheel house liner to the front wheel house opening when installing the front fender liner. Later, attach the wheel speed sensor harness (1) to the wheel house liner. Install the liner of the wheel house using push/pins (6) and (9), then put in all bolts (7) and tighten them according to the instructions. Make sure to install the already-torqued wheel and tire after brake removal. Install the splash guard (2) first, attaching it by screws. Then, securely attach the splash shield (2) with push pin fasteners (4) and finally place the flare molding rivets (2) in place.