How to Install a Door Latch Cable for the Rear Door on 2009 Chrysler 300?

For the installation of Rear Door Remote Lock Actuator Cable, insert it at the shut face hole of the door, tighten the cable nut and zip ties to the bar of the door. Rivet on the actuator cable bracket to the door, and replace the watershield and trim panel.

OEM 2009 Chrysler 300 Door Latch Cable

Door Lock Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Latch Cables found

View related parts
2009 Chrysler 300 Latch Rods, Rear Lower Driver Side Part Number: 5065453AC
Product Specifications
- Other Name: Link - Door Latch; Door Lock Operating Rod, Rear Left Lower; Link Door Latch
- Position: Rear Lower Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.6 x 0.6 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065453AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Latch Rods, Rear Lower Passenger Side Part Number: 5065452AC
Product Specifications
- Other Name: Link - Door Latch; Door Lock Operating Rod, Rear Right Lower; Link Door Latch
- Position: Rear Lower Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.3 x 0.9 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065452AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Chrysler 300 Door Latch Cable Parts and Q&A

Q: How to Install a Door Latch Cable for the Rear Door on 2009 Chrysler 300?
A: For the installation of Rear Door Remote Lock Actuator Cable, insert it at the shut face hole of the door, tighten the cable nut and zip ties to the bar of the door. Rivet on the actuator cable bracket to the door, and replace the watershield and trim panel.