How to Install Parking Brake Shoes on 2009 Chrysler Aspen?

You should reassemble the rear park brake shoes before installing the parking brake shoes. After that, insert the axle shaft with part number 1. After that, fasten the park brake cable to the lever behind the support plate and use part number 1 to unlock the cable. Adjust the rear brake shoes whenever required. Installed disc brake caliper and the disc brake rotor as directed in the manual. After that, install the wheels and tires and bring the vehicle down securely. You should stop the vehicle gently once from 25 miles per hour on dry concrete and press the parking brake pedal after changing the lining or on a new car, to help break in the system.

OEM 2009 Chrysler Aspen Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Brake Shoe found

View related parts
2009 Chrysler Aspen Parking Brake Shoes, Rear Part Number: 68001472AB
$47.49 MSRP: $71.60
You Save: $24.11 (34%)
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5080568AC, 5080568AB, 68001472AA
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.9 x 5.4 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68001472AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Parking Brake Shoe Parts and Q&A

Q: How to Install Parking Brake Shoes on 2009 Chrysler Aspen?
A: You should reassemble the rear park brake shoes before installing the parking brake shoes. After that, insert the axle shaft with part number 1. After that, fasten the park brake cable to the lever behind the support plate and use part number 1 to unlock the cable. Adjust the rear brake shoes whenever required. Installed disc brake caliper and the disc brake rotor as directed in the manual. After that, install the wheels and tires and bring the vehicle down securely. You should stop the vehicle gently once from 25 miles per hour on dry concrete and press the parking brake pedal after changing the lining or on a new car, to help break in the system.