How to Install a Camshaft Position Sensor on a 4.7L Engine on 2009 Chrysler Aspen?

Before installing the Camshaft Position Sensor, be sure to clean out the machined hole in the cylinder head. Use a drop of engine oil on the sensor O-ring, then place the sensor into the cylinder head by gently moving it back and forth, careful to avoid twisting. Make sure the sensor is touching the cylinder head before you tighten the bolt to stop the tang from being damaged. Hold the mounting bolt at 12 Nm (106 in.lbs.) and secure the electrical connector to the sensor.

OEM 2009 Chrysler Aspen Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2009 Chrysler Aspen Camshaft Position Sensor Part Number: 5149054AC
$34.88 MSRP: $51.70
You Save: $16.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149054AA, 5149054AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.1 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149054AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Camshaft Position Sensor Parts and Q&A

Q: How to Install a Camshaft Position Sensor on a 4.7L Engine on 2009 Chrysler Aspen?
A: Before installing the Camshaft Position Sensor, be sure to clean out the machined hole in the cylinder head. Use a drop of engine oil on the sensor O-ring, then place the sensor into the cylinder head by gently moving it back and forth, careful to avoid twisting. Make sure the sensor is touching the cylinder head before you tighten the bolt to stop the tang from being damaged. Hold the mounting bolt at 12 Nm (106 in.lbs.) and secure the electrical connector to the sensor.