How to Remove the Camshaft Position Sensor from the Right Cylinder Head on Chrysler Aspen?

The Camshaft Position Sensor (CMP) is located and bolted to the top and front of the right cylinder head. Make sure the vehicle is held up safely before proceeding to take out the sensor. After that, separate the electric connection from the CMP sensor. After that, take out the sensor mounting bolt. Remove the sensor from the cylinder head by twisting it and inspect the sensor O-ring.

How to Install a Camshaft Position Sensor on a 4.7L Engine on Chrysler Aspen?

Before installing the Camshaft Position Sensor, you need to clean the machined hole in the cylinder head. Once done, rub a little engine oil onto the sensor O-ring. Fit the sensor into the cylinder head using little motion, checking you don't twist it so as not to harm the O-ring. Check that the sensor is even with the cylinder head before screwing down the sensor bolt so you do not damage the sensor mounting tang. After that, put in the mounting bolt and tighten it to 12 Nm (106 in. lbs.), then link the sensor's electrical connector.

OEM Chrysler Aspen Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
Chrysler Aspen Camshaft Position Sensor Part Number: 5149054AC
$34.88 MSRP: $51.70
You Save: $16.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149054AA, 5149054AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Camshaft Position Sensor Part Number: 56041584AF
$105.20 MSRP: $158.00
You Save: $52.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Camshaft
- Replaces: 56041584AE, 56028133AE, 56028133AD, 56041584AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Chrysler Aspen Camshaft Position Sensor

Choose OEM Camshaft Position Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Camshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Aspen Camshaft Position Sensor is a critical part that plays a major role in the improvements in the Chrysler Aspen vehicles' dependability and power. This sensor is erratic in following the position and speed of the camshaft while feeding the most vital data to ECM with reference to fuel injection and ignition timing. It is most essential to note that this synchronization is essential aphelia particularly in Chrysler Aspen cars that were fitted with variable valve timing for efficient engine operation and Economic fuel consumption. Here is the Chrysler Aspen Camshaft Position Sensor that can be used for different Aspen models between 2006 and 2008 to ensure the proper functioning of the engine for cars of diverse series. Its positioning is usually above the camshaft, and due to this it offers accurate readings for the over-all safety and performance of the car. Significantly, we see how the Chrysler Aspen's desirable attributes, such as the luxurious interiors for accommodations, are partnered with viable options on the engine like the 5.7L Hemi V8; more so, the camshaft position sensor reliability assists in avoiding performance hitches that could be witnessed in case the sensor had a problem. Furthermore, there is a unique Chrysler Aspen Camshaft Position Sensor in the automotive market because of its durability and excellent design for long-lasting use with precise engineering. If Chrysler Aspen owners ensure the proper management of this important device, they will have a more comfortable and efficient ride, thus encouraging the perceptions associated with the car's reliability and worth.

Chrysler Aspen Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
5149054AC
Q: How to Remove the Camshaft Position Sensor from the Right Cylinder Head on Chrysler Aspen?
A:
The Camshaft Position Sensor (CMP) is located and bolted to the top and front of the right cylinder head. Make sure the vehicle is held up safely before proceeding to take out the sensor. After that, separate the electric connection from the CMP sensor. After that, take out the sensor mounting bolt. Remove the sensor from the cylinder head by twisting it and inspect the sensor O-ring.
Camshaft Position Sensor
56041584AF
Q: How to Install a Camshaft Position Sensor on a 4.7L Engine on Chrysler Aspen?
A:
Before installing the Camshaft Position Sensor, you need to clean the machined hole in the cylinder head. Once done, rub a little engine oil onto the sensor O-ring. Fit the sensor into the cylinder head using little motion, checking you don't twist it so as not to harm the O-ring. Check that the sensor is even with the cylinder head before screwing down the sensor bolt so you do not damage the sensor mounting tang. After that, put in the mounting bolt and tighten it to 12 Nm (106 in. lbs.), then link the sensor's electrical connector.