How to Properly Install a Front Wiper Arm on 2009 Chrysler Aspen?

The wiper motor should be placed in park before you install the front wiper arms. After the wipers are still, press the ignition switch back to Off. When you park the motor, you must index the front wiper arms to the pivot shafts. Link the pivot end of the wiper arm to the lower edge of the pivot shafts so that the wiper blade sits parallel to the lines hidden in the upper part of the lower windshield blackout area. Release some spring tension by pulling the front wiper arm slightly away from the windshield, then slide it down over the pivot shaft. Tighten the nuts that hold the wiper arm to the pivot shaft to 44.5 Nm (33 ft. lbs.). Wet the front window, use the wipers, flip the wiper switch to the Off position and look at the wiper arms to see if they're in the correct spot.

OEM 2009 Chrysler Aspen Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
2009 Chrysler Aspen Wiper Arm, Passenger Side Part Number: 68044499AA
$125.71 MSRP: $175.00
You Save: $49.29 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiper Arm - Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Wiper
- Position: Passenger Side
- Replaces: 5135556AB
- Item Weight: 2.00 Pounds
- Item Dimensions: 31.2 x 4.2 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68044499AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Wiper Arm, Rear Part Number: 5135583AA
Product Specifications
- Other Name: Arm Wiper - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Liftgate Wiper; Arm Rear Wiper
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.8 x 3.2 x 14.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135583AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Wiper Arm, Driver Side Part Number: 5135557AA
Product Specifications
- Other Name: Wiper Arm - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Item Dimensions: 29.6 x 4.2 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135557AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Wiper Arm Parts and Q&A

Q: How to Properly Install a Front Wiper Arm on 2009 Chrysler Aspen?
A: The wiper motor should be placed in park before you install the front wiper arms. After the wipers are still, press the ignition switch back to Off. When you park the motor, you must index the front wiper arms to the pivot shafts. Link the pivot end of the wiper arm to the lower edge of the pivot shafts so that the wiper blade sits parallel to the lines hidden in the upper part of the lower windshield blackout area. Release some spring tension by pulling the front wiper arm slightly away from the windshield, then slide it down over the pivot shaft. Tighten the nuts that hold the wiper arm to the pivot shaft to 44.5 Nm (33 ft. lbs.). Wet the front window, use the wipers, flip the wiper switch to the Off position and look at the wiper arms to see if they're in the correct spot.