How to Install a Coolant Temperature Sensor in 2.0L/2.4L Engines on 2009 Chrysler PT Cruiser?

Make sure to install the engine coolant temperature sensor on the 2.0L/2.4L non-turbo car, torque it to 19 Nm (168 in. lbs.) and then plug in the electrical connector. After that, fill the cooling system and add the negative battery cable. Attach a sensor to the turbo engine and tighten its torque to 19 Nm with torque wrench, connect the electrical wire and place the top shut strut as final assembly. Then, add fluid to the cooling system and link the negative battery cable back.

OEM 2009 Chrysler PT Cruiser Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2009 Chrysler PT Cruiser Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.9 x 1.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2009 Chrysler PT Cruiser Coolant Temperature Sensor Parts and Q&A

Q: How to Install a Coolant Temperature Sensor in 2.0L/2.4L Engines on 2009 Chrysler PT Cruiser?
A: Make sure to install the engine coolant temperature sensor on the 2.0L/2.4L non-turbo car, torque it to 19 Nm (168 in. lbs.) and then plug in the electrical connector. After that, fill the cooling system and add the negative battery cable. Attach a sensor to the turbo engine and tighten its torque to 19 Nm with torque wrench, connect the electrical wire and place the top shut strut as final assembly. Then, add fluid to the cooling system and link the negative battery cable back.