How is the MAP Sensor Installed on the Intake Manifold on 2009 Chrysler PT Cruiser?

To install the MAP sensor, insert the MAP sensor into the intake manifold without damaging the o-ring seal. Tighten the mounting screws to 2 Nm (20 in. lbs), connect the electrical connector, then reinstall the negative battery cable, air cleaner lid and makeup air hose.

OEM 2009 Chrysler PT Cruiser MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2009 Chrysler PT Cruiser M.A.P. Sensor Part Number: 5033224AB
$56.38 MSRP: $81.15
You Save: $24.77 (31%)
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor Map
- Replaces: 5033224AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033224AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler PT Cruiser M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2009 Chrysler PT Cruiser MAP Sensor Parts and Q&A

Q: How is the MAP Sensor Installed on the Intake Manifold on 2009 Chrysler PT Cruiser?
A: To install the MAP sensor, insert the MAP sensor into the intake manifold without damaging the o-ring seal. Tighten the mounting screws to 2 Nm (20 in. lbs), connect the electrical connector, then reinstall the negative battery cable, air cleaner lid and makeup air hose.