How to Install Trunk Lid Lift Support Gas Struts on 2009 Chrysler PT Cruiser?

Install the gas support rods by positioning each rod to the liftgate and fastening them with the pivot bolts, tightening to 28 Nm (21 ft. lbs.). Subsequently, align every gas support rod with the liftgate opening and fasten its pivot bolts, once again torquing to 28 Nm (21 ft. lbs.). Once the installation is done, disassemble the lifting device and test the liftgate's operation.

OEM 2009 Chrysler PT Cruiser Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lid Lift Support found

View related parts
2009 Chrysler PT Cruiser Lift Cylinder, Driver Side Part Number: 4589630AC
$47.87 MSRP: $71.25
You Save: $23.38 (33%)
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch Lift Support; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support.; Support Cylinder
- Position: Driver Side
- Replaces: 4589631AA, 4589630AA
- Item Weight: 3.20 Pounds
- Item Dimensions: 1.3 x 6.4 x 28.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589630AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2009 Chrysler PT Cruiser Trunk Lid Lift Support Parts and Q&A

Q: How to Install Trunk Lid Lift Support Gas Struts on 2009 Chrysler PT Cruiser?
A: Install the gas support rods by positioning each rod to the liftgate and fastening them with the pivot bolts, tightening to 28 Nm (21 ft. lbs.). Subsequently, align every gas support rod with the liftgate opening and fasten its pivot bolts, once again torquing to 28 Nm (21 ft. lbs.). Once the installation is done, disassemble the lifting device and test the liftgate's operation.