How to Remove a Camshaft on 2009 Chrysler Sebring?

First pull upward on the engine cover to remove it before taking out the camshaft. Remove the negative battery cable from its plug and then remove the cylinder head cover. Lift and shore up the car, then take off the frame cover part from the right splash shield. With the engine at TDC, compare where the camshaft timing signal is with the surface where the cylinder head cover is sealed. Identify the chain links following the timing marks with a paint marker. Lift out the timing tensioner plug from the front cover, then slip a small allen wrench into the timing tensioner plug hole to release the tensioner under the allen wrench handle. Interest Locking Wedge 9701 between the camshaft phasers and lightly press it home so it doesn't move. Mark the place and position of each camshaft bearing cap cap with a permanent ink or paint marker and remove the cap on the front side. Gradually tighten each removed intake and exhaust camshaft bearing cap bolt by one closing and then removing them. Lift the rear of the intake camshaft upward and spin it while removing it from the front bearing cradle, next lift the timing chain from the sprocket and get rid of the exhaust camshaft. After that, put wire around the timing chain to avoid it falling into the timing chain cover.

OEM 2009 Chrysler Sebring Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Camshafts found

View related parts
2009 Chrysler Sebring Exhaust Camshaft Part Number: 4884736AC
$307.04 MSRP: $457.00
You Save: $149.96 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Exhaust; Camshaft; Camshaft Exhaust
- Replaces: 4884736AB
- Item Weight: 5.30 Pounds
- Item Dimensions: 24.7 x 2.9 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884736AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler Sebring Camshaft Part Number: 4792063AB
$377.41 MSRP: $500.00
You Save: $122.59 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Intake; Camshaft Intake
- Item Weight: 6.60 Pounds
- Item Dimensions: 24.7 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792063AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2009 Chrysler Sebring Intake Camshaft Part Number: 4884735AC
$308.18 MSRP: $459.00
You Save: $150.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Intake; Camshaft; Camshaft Intake
- Replaces: 4884735AB
- Item Weight: 3.80 Pounds
- Item Dimensions: 9.3 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884735AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2009 Chrysler Sebring Camshaft Part Number: 4792743AB
$731.40 MSRP: $1075.00
You Save: $343.60 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Item Weight: 6.50 Pounds
- Item Dimensions: 19.2 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792743AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Chrysler Sebring Submodels:
- Limited | 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Camshaft Part Number: 4792058AB
Product Specifications
- Other Name: Camshaft - Exhaust; Camshaft Exhaust
- Item Weight: 3.30 Pounds
- Item Dimensions: 16.2 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792058AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2009 Chrysler Sebring Camshaft Part Number: 4792744AA
Product Specifications
- Item Weight: 6.10 Pounds
- Item Dimensions: 26.3 x 5.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792744AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Chrysler Sebring Submodels:
- Limited | 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Camshaft Part Number: 4792059AB
Product Specifications
- Other Name: Camshaft - Exhaust; Camshaft Exhaust
- Item Weight: 3.70 Pounds
- Item Dimensions: 18.2 x 2.5 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792059AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2009 Chrysler Sebring Camshaft Part Number: 4792062AB
Product Specifications
- Other Name: Camshaft - Intake; Camshaft Intake
- Item Weight: 4.60 Pounds
- Item Dimensions: 26.3 x 8.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2009 Chrysler Sebring Camshaft Parts and Q&A

Q: How to Remove a Camshaft on 2009 Chrysler Sebring?
A: First pull upward on the engine cover to remove it before taking out the camshaft. Remove the negative battery cable from its plug and then remove the cylinder head cover. Lift and shore up the car, then take off the frame cover part from the right splash shield. With the engine at TDC, compare where the camshaft timing signal is with the surface where the cylinder head cover is sealed. Identify the chain links following the timing marks with a paint marker. Lift out the timing tensioner plug from the front cover, then slip a small allen wrench into the timing tensioner plug hole to release the tensioner under the allen wrench handle. Interest Locking Wedge 9701 between the camshaft phasers and lightly press it home so it doesn't move. Mark the place and position of each camshaft bearing cap cap with a permanent ink or paint marker and remove the cap on the front side. Gradually tighten each removed intake and exhaust camshaft bearing cap bolt by one closing and then removing them. Lift the rear of the intake camshaft upward and spin it while removing it from the front bearing cradle, next lift the timing chain from the sprocket and get rid of the exhaust camshaft. After that, put wire around the timing chain to avoid it falling into the timing chain cover.