How to Install a Yaw Sensor and Complete the Associated Steps on 2009 Chrysler Town & Country?

To install the Yaw Sensor, place the device on the bracket with the arrow pointing forward, the connector to the passenger side. Tighten it with two screws at 9 NM (Newtons), wire the wiring harness and replace the components such as the floor duct and instrument panel. Finally, reconnect the battery and carry out a Diagnostic Verification Test.

OEM 2009 Chrysler Town & Country Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2009 Chrysler Town & Country Yaw Rate Sensor Part Number: 56029483AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Lateral Accelerometer Sensor; Electronic Stability Module.
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 4.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029483AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2009 Chrysler Town & Country Yaw Sensor Parts and Q&A

Q: How to Install a Yaw Sensor and Complete the Associated Steps on 2009 Chrysler Town & Country?
A: To install the Yaw Sensor, place the device on the bracket with the arrow pointing forward, the connector to the passenger side. Tighten it with two screws at 9 NM (Newtons), wire the wiring harness and replace the components such as the floor duct and instrument panel. Finally, reconnect the battery and carry out a Diagnostic Verification Test.