How to Remove an Exhaust Manifold on 2009 Dodge Caliber?

Before removing the exhaust manifold, start by opening and taking off the engine cover. After that, remove the bolts holding the upper heat shield in place and pull the shield away after separating the negative cable from the battery. After that, take out the exhaust pipe from the manifold and remove its support bracket. Remove the exhaust manifold heat shield after that and disconnect the oxygen sensor electrical connector. Following this, take out the exhaust manifold bolts and throw away the gasket found behind the manifold.

OEM 2009 Dodge Caliber Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Exhaust Manifolds found

View related parts
2009 Dodge Caliber Exhaust Manifold Part Number: 4693321AD
$321.77 MSRP: $479.00
You Save: $157.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Exhaust for Converter Manifold Assembly, Refer to Group 11 Exhaust.
- Item Weight: 14.40 Pounds
- Item Dimensions: 9.4 x 10.5 x 21.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4693321AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Exhaust Manifold Part Number: 4884822AC
$140.95 MSRP: $894.00
You Save: $753.05 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold Exhaust
- Item Weight: 2.10 Pounds
- Item Dimensions: 15.4 x 9.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884822AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS

2009 Dodge Caliber Exhaust Manifold Parts and Q&A

Q: How to Remove an Exhaust Manifold on 2009 Dodge Caliber?
A: Before removing the exhaust manifold, start by opening and taking off the engine cover. After that, remove the bolts holding the upper heat shield in place and pull the shield away after separating the negative cable from the battery. After that, take out the exhaust pipe from the manifold and remove its support bracket. Remove the exhaust manifold heat shield after that and disconnect the oxygen sensor electrical connector. Following this, take out the exhaust manifold bolts and throw away the gasket found behind the manifold.