How to Install an Axle Shaft Seal and Verify Rear Axle Fluid Levels on 2009 Dodge Challenger?

To install the new axle shaft seal, use Installer 9223 and lubricate the inside diameter with Mopar(R) Gear and Axle Lubricant 75W-140. Install the halfshaft(s), then check and adjust the rear axle fluid level, topping off with the same lubricant and reinstalling the fill plug, torqued to 60 Nm (44 ft. lbs.).

OEM 2009 Dodge Challenger Axle Shaft Seal

CV Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Axle Shaft Seal found

View related parts
2009 Dodge Challenger Axle Seals, Rear Part Number: 68014931AA
$53.88 MSRP: $77.60
You Save: $23.72 (31%)
Product Specifications
- Other Name: Seal - Output; Drive Axle Shaft Seal, Rear; Axle Differential Seal; Axle Seal; Seal; Seal Output Media Image In Catalog Is Wrong, Part Numbers Are This Axle Seal; Seal Axle Drive Shaft; Seal Output
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.1 x 4.9 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68014931AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Challenger Axle Shaft Seal Parts and Q&A

Q: How to Install an Axle Shaft Seal and Verify Rear Axle Fluid Levels on 2009 Dodge Challenger?
A: To install the new axle shaft seal, use Installer 9223 and lubricate the inside diameter with Mopar(R) Gear and Axle Lubricant 75W-140. Install the halfshaft(s), then check and adjust the rear axle fluid level, topping off with the same lubricant and reinstalling the fill plug, torqued to 60 Nm (44 ft. lbs.).