How to Service and Repair an Intake Manifold for Upper on 2009 Dodge Challenger?

Remove and isolate the negative battery cable before you tackle the upper intake manifold. After that, pull the IAT sensor electrical connector off the throttle body and remove the air inlet hose. Also, unplug electrical connector MAP sensor and remove hoses 1, 2 and 3 from the upper intake manifold. Separate the connectors from the throttle control (5) and remove all fasteners from the top of the engine to lift off the throttle bracket (4). After finishing step 3, remove the wiper module, strut tower support and EGR tube (1). Unhook the connectors from both the manifold tuning valve (1) and short runner valve (2) and take out all the fasteners (2) securing the intake manifold support brackets. After that, take out the bolts holding the upper intake manifold in place, the insulation foam pad and the manifold itself, cleaning all the gasket surfaces.

OEM 2009 Dodge Challenger Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Intake Manifolds found

View related parts
2009 Dodge Challenger Intake Plenum, Upper Part Number: 4591863AM
$1121.58 MSRP: $1705.00
You Save: $583.42 (35%)
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum; Plenum Intake Manifold; Intake Manifold
- Position: Upper
- Replaces: 4591863AL
- Item Weight: 22.20 Pounds
- Item Dimensions: 35.0 x 29.1 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591863AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SE | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Challenger Intake Manifold, Lower Part Number: 4792184AH
$387.01 MSRP: $569.00
You Save: $181.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower, Upper
- Position: Lower
- Item Weight: 7.30 Pounds
- Item Dimensions: 23.7 x 7.3 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792184AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Challenger Intake Manifold Part Number: 68048131AC
$367.55 MSRP: $537.00
You Save: $169.45 (32%)
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold; Manifold Kit Engine Intake
- Replaces: 68048131AA, 68048131AB
- Item Weight: 21.60 Pounds
- Item Dimensions: 24.1 x 22.7 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68048131AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- R/T, R/T Classic | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Challenger Intake Manifold Part Number: 5037510AK
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 5037510AJ, 5037510AH, 5037510AG, 5037510AI
- Item Weight: 36.80 Pounds
- Item Dimensions: 25.5 x 18.0 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037510AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

2009 Dodge Challenger Intake Manifold Parts and Q&A

Q: How to Service and Repair an Intake Manifold for Upper on 2009 Dodge Challenger?
A: Remove and isolate the negative battery cable before you tackle the upper intake manifold. After that, pull the IAT sensor electrical connector off the throttle body and remove the air inlet hose. Also, unplug electrical connector MAP sensor and remove hoses 1, 2 and 3 from the upper intake manifold. Separate the connectors from the throttle control (5) and remove all fasteners from the top of the engine to lift off the throttle bracket (4). After finishing step 3, remove the wiper module, strut tower support and EGR tube (1). Unhook the connectors from both the manifold tuning valve (1) and short runner valve (2) and take out all the fasteners (2) securing the intake manifold support brackets. After that, take out the bolts holding the upper intake manifold in place, the insulation foam pad and the manifold itself, cleaning all the gasket surfaces.