How to Service and Repair an Intake Manifold for Lower on Dodge Challenger?

Before you do any work, make sure to first remove any dirt or dust from the lower intake manifold's seals. Put in place the gaskets and the intake manifold, then carefully add the manifold's bolts to the cylinder head in order they appear in the instructions and tighten them to 28 Nm (250 in. lbs.). Only after that, install the fuel rail and injectors as one assembly and attach the fuel supply hose to it. After that, link the electrical connectors on the fuel injectors and coolant temperature sensor and finally connect the heater hose onto the coolant pipe. Pull the coolant hose over the coolant pipe and axis, then mount the upper intake manifold. Wrapping up, assemble the upper radiator hose to the thermostat housing, put coolant in the system and hook the negative battery cable, fastening it to 5 Nm (45 in. lbs.).

How to Remove an Intake Manifold on Dodge Challenger?

Before removing the intake manifold, first, take out the engine covers. Following that, open the fuel system releasing procedure. Send the car first to the safety area and then unhook both the fuel supply line and negative battery cable. Remove the air cleaner housing and also clean out the air tube. Remove the electrical connections from the Manifold Absolute Pressure (MAP) Sensor, Short Runner Valve (SRV), Fuel Injectors and Electric Throttle Control (ETC). Remove the brake booster hose, purge hose and Make Up Air Hose (MUA) as well. The intake manifold and throttle body should be removed all together, not individually. After correctly beginning each section, undo all the fasteners holding in the intake manifold before removing it complete with all related parts.

OEM Dodge Challenger Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Intake Manifolds found

View related parts
Dodge Challenger Intake Manifold, Upper Part Number: 5184693AE
$381.29 MSRP: $560.00
You Save: $178.71 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum; Plenum; Plenum Intake Manifold
- Position: Upper
- Replaces: 68621090AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT, Rallye Redline, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Intake Manifold, Lower Part Number: 5184199AF
$381.29 MSRP: $560.00
You Save: $178.71 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Intake Plenum; Manifold Intake; Engine Intake Manifold
- Position: Lower
- Replaces: 5184199AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT, Rallye Redline, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Intake Plenum, Upper Part Number: 4591863AM
$1121.58 MSRP: $1705.00
You Save: $583.42 (35%)
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum; Plenum Intake Manifold; Intake Manifold
- Position: Upper
- Replaces: 4591863AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | SE | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Challenger Intake Manifold, Lower Part Number: 4792184AH
$387.01 MSRP: $569.00
You Save: $181.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower, Upper
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | SE | 6 Cyl 3.5 L GAS
View related parts
Dodge Challenger Intake Manifold Part Number: 68048131AC
$367.55 MSRP: $537.00
You Save: $169.45 (32%)
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold; Manifold Kit Engine Intake
- Replaces: 68048131AA, 68048131AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2014 Dodge Challenger | R/T, R/T Classic | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Intake Manifold Part Number: 68190715AD
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold
- Replaces: 68190715AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT8, Scat Pack, T/A 392, T/A 392 Widebody | 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Intake Manifold Part Number: 68189105AC
$604.56 MSRP: $889.00
You Save: $284.44 (32%)
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold
- Replaces: 68189105AB, 68189105AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2023 Dodge Challenger | R/T, R/T Plus, R/T Plus Shaker, R/T Shaker, T/A | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Intake Manifold Part Number: 5037510AK
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 5037510AJ, 5037510AH, 5037510AG, 5037510AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

Dodge Challenger Intake Manifold

Choose OEM Intake Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Intake Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Intake manifold of Dodge Challenger cars defines responsibility of distributing air-fuel pinion evenly to cylinder in order to deliver optimal performances. It consists of a series of tubes that channel air from the air filter through the throttle body and due to this the air systems need to be airtight for the accurate functioning of engine control unit. Damage to the Intake Manifold also leads to some sort of instability in the performance of the vehicle's engine as well as permanent damages. Since the early model chrashes, Dodge challenger car models as well as other models have different types of Intake Manifolds that can be made from metals such as aluminum and cast iron, newer versions of intake manifolds can also be made from composite plastic materials. Technological advancements including the Variable Length Intake Manifold (VLIM) improve on power and fuel economy through adjusting the intake tract length, using the Venturi effect and Helmholtz resonance. All of these bring a lot of impact on the performance of the Dodge Challenger as a whole.

Dodge Challenger Intake Manifold Parts and Q&A

Intake Manifold, Lower
4792184AH
Q: How to Service and Repair an Intake Manifold for Lower on Dodge Challenger?
A:
Before you do any work, make sure to first remove any dirt or dust from the lower intake manifold's seals. Put in place the gaskets and the intake manifold, then carefully add the manifold's bolts to the cylinder head in order they appear in the instructions and tighten them to 28 Nm (250 in. lbs.). Only after that, install the Fuel Rail and injectors as one assembly and attach the fuel supply hose to it. After that, link the electrical connectors on the fuel injectors and Coolant Temperature Sensor and finally connect the heater hose onto the coolant pipe. Pull the coolant hose over the coolant pipe and axis, then mount the upper intake manifold. Wrapping up, assemble the upper radiator hose to the thermostat housing, put coolant in the system and hook the negative Battery Cable, fastening it to 5 Nm (45 in. lbs.).
Intake Manifold
5037510AK
Q: How to Remove an Intake Manifold on Dodge Challenger?
A:
Before removing the intake manifold, first, take out the engine covers. Following that, open the fuel system releasing procedure. Send the car first to the safety area and then unhook both the fuel supply line and negative Battery Cable. Remove the air cleaner housing and also clean out the air tube. Remove the electrical connections from the Manifold Absolute Pressure (MAP) Sensor, Short Runner Valve (SRV), Fuel Injectors and Electric Throttle Control (ETC). Remove the brake booster hose, purge hose and Make Up Air Hose (MUA) as well. The intake manifold and Throttle Body should be removed all together, not individually. After correctly beginning each section, undo all the fasteners holding in the intake manifold before removing it complete with all related parts.