How to Install an Intermediate Shaft on 2009 Dodge Charger?

Fit the intermediate shaft by pushing the end of the gear through the dash board, pushing the seal around the studs and fitting the upper coupling into the steering column. Install pinch bolts and mounting nuts to the required torque. Lastly, ensure that the steering column is functioning.

OEM 2009 Dodge Charger Intermediate Shaft

Steering Column Intermediate Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intermediate Shaft found

View related parts
2009 Dodge Charger Center Shaft, Front Part Number: 68052285AC
$605.54 MSRP: $918.00
You Save: $312.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Intermediate; CV Intermediate Shaft, Front; Intermed Shaft; Shaft Intermediate
- Position: Front
- Replaces: 4578647AA, 68052285AB, 68067528AB, 68067528AA, 68052285AA
- Item Weight: 13.60 Pounds
- Item Dimensions: 22.8 x 8.1 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68052285AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Charger Intermediate Shaft Parts and Q&A

Q: How to Install an Intermediate Shaft on 2009 Dodge Charger?
A: Fit the intermediate shaft by pushing the end of the gear through the dash board, pushing the seal around the studs and fitting the upper coupling into the steering column. Install pinch bolts and mounting nuts to the required torque. Lastly, ensure that the steering column is functioning.