How to Service and Repair a Washer Pump for Headlamps on 2009 Dodge Charger?

Disconnect the battery negative cable and separate it before starting to fix or repair the headlamp washer pump motor. Remove the hose from the washer pump at the bottom of the engine, connect it to a tubing and allow the washer fluid to run into a clean container. After that, take away the washer reservoir. Press the latch down and pull the hose off to disconnect the high pressure headlamp washer pump. You should then unplug the electrical cable from the high pressure auto headlamp washer pump (1) after that. Take the pump out of the reservoir by lifting it up and out of the grommet and do not damage or puncture the reservoir while doing so. Following this, remove and throw out the pump grommet.

OEM 2009 Dodge Charger Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2009 Dodge Charger Washer Pump Part Number: 5139113AA
$121.28 MSRP: $181.00
You Save: $59.72 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Pump Windshield Washer Single Outlet; Pump Washer, Windshield
- Replaces: 68125519AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 2.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139113AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Charger Washer Pump Parts and Q&A

Q: How to Service and Repair a Washer Pump for Headlamps on 2009 Dodge Charger?
A: Disconnect the battery negative cable and separate it before starting to fix or repair the headlamp washer pump motor. Remove the hose from the washer pump at the bottom of the engine, connect it to a tubing and allow the washer fluid to run into a clean container. After that, take away the washer reservoir. Press the latch down and pull the hose off to disconnect the high pressure headlamp washer pump. You should then unplug the electrical cable from the high pressure auto headlamp washer pump (1) after that. Take the pump out of the reservoir by lifting it up and out of the grommet and do not damage or puncture the reservoir while doing so. Following this, remove and throw out the pump grommet.