How to Maintain and Fix a Washer Pump for Headlamps on 2008 Dodge Charger?

Unplug the negative battery cable before starting to service the headlamp washer pump. Take the hose from the washer reservoir and detach it from the front pump and then let the fluid drain through a temporary hose connected to the pump. The next step is to get rid of the washer reservoir. To remove the high pressure headlamp washer pump hose, slide down the latch and pull the hose off. After that, unplug the electric connector for the high pressure headlamp washer pump motor (1). Lift the pump from the reservoir and unseat it from the mounting grommet by pulling it up and out of the reservoir, treating it gently so you do not damage the sealing surface or puncture the reservoir. Then, pull out the pump grommet and toss it away.

OEM 2008 Dodge Charger Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Pumps found

View related parts
2008 Dodge Charger Washer Pump Part Number: 5139113AA
$121.28 MSRP: $181.00
You Save: $59.72 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Pump Windshield Washer Single Outlet; Pump Washer, Windshield
- Replaces: 68125519AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 2.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139113AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2008 Dodge Charger Washer Pump Part Number: 5012060AA
$126.63 MSRP: $167.00
You Save: $40.37 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Washer, Headlamp; Washer Pump Repair Kit; Windshield Washer Pump; Headlight Washer Pump; Pump Washer, Headlamp
- Replaces: 68041383AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012060AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Charger Washer Pump Parts and Q&A

Q: How to Maintain and Fix a Washer Pump for Headlamps on 2008 Dodge Charger?
A: Unplug the negative battery cable before starting to service the headlamp washer pump. Take the hose from the washer reservoir and detach it from the front pump and then let the fluid drain through a temporary hose connected to the pump. The next step is to get rid of the washer reservoir. To remove the high pressure headlamp washer pump hose, slide down the latch and pull the hose off. After that, unplug the electric connector for the high pressure headlamp washer pump motor (1). Lift the pump from the reservoir and unseat it from the mounting grommet by pulling it up and out of the reservoir, treating it gently so you do not damage the sealing surface or puncture the reservoir. Then, pull out the pump grommet and toss it away.