How to Install an Ignition Lock Cylinder on 2009 Dodge Durango?

When installing the ignition lock cylinder, first slide the ignition key (2) into the key cylinder (1). Put the end of the key cylinder over the ignition switch, then press (1) all the way back until it clicks. Following this, put in the lower shroud, connect the tilt lever handle and attach the steering column opening cover. At the end, connect the battery again to finish the installation.

OEM 2009 Dodge Durango Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2009 Dodge Durango Ignition Lock Cylinder Part Number: 68027525AA
$84.82 MSRP: $151.00
You Save: $66.18 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Ignition Lock; Ignition Cylinder; Cylinder Ignition Lock
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.9 x 1.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027525AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Dodge Durango Ignition Lock Cylinder Parts and Q&A

Q: How to Install an Ignition Lock Cylinder on 2009 Dodge Durango?
A: When installing the ignition lock cylinder, first slide the ignition key (2) into the key cylinder (1). Put the end of the key cylinder over the ignition switch, then press (1) all the way back until it clicks. Following this, put in the lower shroud, connect the tilt lever handle and attach the steering column opening cover. At the end, connect the battery again to finish the installation.