How to Install an Ignition Lock Cylinder on Dodge Durango?

Before installing the ignition lock cylinder, you must slide the ignition key into its keyhole. First, match the rear edge of the key cylinder with the ignition switch in the hole before you fit it into the housing (3). Press the key cylinder (1) down until it sets itself in position. Then, bolt the lower shroud in place, add the tilt lever handle and put the cover for the steering column in. In the end, reattach the battery to the car.

How to Remove the Ignition Lock Cylinder on Dodge Durango?

To take out the ignition lock cylinder, you should first remove the negative battery cable. After that, remove the cover over the steering column opening, followed by pulling off the tilt lever handle and lower shroud from the column. Set the shifter in PARK and remove the ignition key from the ignition lock cylinder. Put the key in RUN position, then with a small punch, press down on the retaining pin and pull the ignition lock cylinder from the ignition switch. At this last step, disconnect the ignition lock cylinder and key from the column.

OEM Dodge Durango Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Lock Cylinders found

View related parts
Dodge Durango Ignition Lock Cylinder Part Number: 68027525AA
$84.82 MSRP: $151.00
You Save: $66.18 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Ignition Lock; Ignition Cylinder; Cylinder Ignition Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Ignition Lock Cylinder Part Number: 5018702AA
$209.61 MSRP: $310.00
You Save: $100.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock - Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder Ignition Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Durango | Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Ignition Switch Part Number: 5003845AA
$192.61 MSRP: $285.00
You Save: $92.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: None - Ignition Lock; Ignition Lock Cylinder; Lock Cylinder; Ignition Cylinder; Cylinder & Keys; Cylinder Ignition Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Durango | Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Durango Ignition Lock Cylinder

Choose OEM Ignition Lock Cylinder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ignition Lock Cylinder follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Ignition Lock Cylinder in Dodge Durango vehicles is basically a component that has three functions as it involves the start of the car's engine through turning of a key. This component is embedded in the key that starts the vehicle ignition when the correct key is inserted and the correct sequence selected. For the past few years, Dodge Durango's models have had mechanical key operating the ignition lock cylinder and electronic keyless ignition. Although the operation of the key-operated ignition lock cylinder incorporates use of keys in tumbler fashion to start the car, the keyless system consists of a fob that communicates with the car's computer for easier and effective operation. However, like with any other device, the regular use of the vehicle brings about cases like wear and tear which could hinder the operations of the Ignition Lock Cylinder and this results in delayed or difficult times in starting the engine as well as cases where the engine could suddenly deny powering the vehicle. In general, it can be stated that over the years, the design of the Dodge Durango's Ignition Lock Cylinder reflects the aspect of security, utility, and accessibility to the drivers.

Dodge Durango Ignition Lock Cylinder Parts and Q&A

Ignition Lock Cylinder
5018702AA
Q: How to Install an Ignition Lock Cylinder on Dodge Durango?
A:
Before installing the ignition lock cylinder, you must slide the ignition key into its keyhole. First, match the rear edge of the key cylinder with the ignition switch in the hole before you fit it into the housing (3). Press the key cylinder (1) down until it sets itself in position. Then, bolt the lower shroud in place, add the tilt lever handle and put the cover for the steering column in. In the end, reattach the battery to the car.
Ignition Lock Cylinder
68027525AA
Q: How to Remove the Ignition Lock Cylinder on Dodge Durango?
A:
To take out the ignition lock cylinder, you should first remove the negative battery cable. After that, remove the cover over the Steering Column opening, followed by pulling off the tilt lever handle and lower shroud from the column. Set the shifter in PARK and remove the ignition key from the ignition lock cylinder. Put the key in RUN position, then with a small punch, press down on the retaining pin and pull the ignition lock cylinder from the ignition switch. At this last step, disconnect the ignition lock cylinder and key from the column.