Other Name: Wheel - Steering; Wheel Steering Leather; Wheel Steering
Replaces: YP211J8AE, YP211J8AC
Item Weight: 4.80 Pounds
Item Dimensions: 16.2 x 16.3 x 8.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: YP211J8AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2009 Dodge Durango Steering Wheel Parts and Q&A
Q: Are You Installing the Steering Wheel Correctly on 2009 Dodge Durango?
A: It's important to use a fresh new steering wheel bolt since you should never reuse the previous one. Put the end of the spline on the steering wheel hub into the column shaft, then secure the steering wheel (1) with the column (4). Ensuring the bolt holding the steering wheel is torqued to the correct specifications ensures the Clock Spring works correctly. Put in the steering wheel bolt (2) and tighten it to 61 Nm (45 ft. lbs.). Afterward, place the air bag from the driver's side into the steering wheel (1).