Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Dodge Durango Rack And Pinion

Steering Rack And Pinion
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack And Pinions found

  • 2009 Dodge Durango Rack And Pinion - 52855758AH
    2009 Dodge Durango Rack And Pinion - 52855758AH
    2009 Dodge Durango Rack And Pinion - 52855758AH
    2009 Dodge Durango Rack And Pinion - 52855758AH
    2009 Dodge Durango Rack And Pinion - 52855758AH
    2009 Dodge Durango Rack And Pinion Diagram - 52855758AH
    View related parts

    2009 Dodge Durango Steering Gear Part Number: 52855758AH

    Product Specifications
    • Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly
    • Replaces: 52855758AE, 52855758AF, 52855758AG
    • Item Weight: 33.20 Pounds
    • Item Dimensions: 6.8 x 10.4 x 62.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52855758AH
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Durango Submodels:
    • Adventurer, Limited, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2009 Dodge Durango Rack And Pinion - 52122302AD
    2009 Dodge Durango Rack And Pinion Diagram - 52122302AD
    View related parts

    2009 Dodge Durango Steering Gear Part Number: 52122302AD

    Product Specifications
    • Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly
    • Replaces: 52122302AB, 52122302AC
    • Item Weight: 32.30 Pounds
    • Item Dimensions: 61.4 x 10.5 x 6.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52122302AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Durango Submodels:
    • Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)

2009 Dodge Durango Rack And Pinion Parts and Q&A

  • Q: How to Remove a Rack and Pinion Steering Gear on 2009 Dodge Durango?
    A: Remove most of the power steering fluid from the pump and central parts before you lock the steering wheel. Lift the vehicle and then take out the front tires. After that, take the nuts off the tie rod ends and use Puller 8677 to unlink the tie rod ends from the knuckles. Take out the rack and pinion pinch bolt and unscrew the lower steering coupling. Bear in mind that the tie rods will partially separate as you turn the rack and pinion right. Turn the rack and pinion to its maximum right position and after that remove the exhaust Y-pipe only for 3.7L and 4.7L engines. After removing the lines from the rack and pinion, remove the front crossmember from the steering box. After that, remove all of the rack and pinion's mounting bolts and washers, along with the bolts and nuts from the rack and pinion shaft and then tip the rack and pinion forward to free it, move it to the right and turn it down on the left to pull it from the car.

Related 2009 Dodge Durango Parts

Alternate Year Models

+
2008 Dodge Durango Rack And Pinion