Other Name: Blade - Front Wiper; Windshield Wiper Blade, Left; Front Blade; Blade Front Wiper; Blade Wiper
Position: Front Driver Side
Item Weight: 1.50 Pounds
Item Dimensions: 27.0 x 1.8 x 0.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5135561AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Other Name: Blade - Front Wiper; Windshield Wiper Blade, Right; Front Blade; Blade Front Wiper; Blade Wiper
Position: Front Passenger Side
Item Weight: 2.20 Pounds
Item Dimensions: 21.3 x 2.3 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68044524AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Limited, Limited Hybrid, SE, SLT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2009 Dodge Durango Wiper Blade Parts and Q&A
Q: How to Replace a Wiper Blade on the Rear Window on 2009 Dodge Durango?
A: The first step to changing the rear wiper element is to remove the rear wiping blade from the wiper arm. Gently hold one wiper blade link with one hand and use the other hand to hold the wiper element and the flexor halfway between the claws on the link. Pull the element and flexor away from the section they are holding, allow enough bending to remove them from the pair of claws, then slide the parts toward the opposing end to get them loose from the other pairs. Once you have put the flexors and the new element in place, return the wiper to your windshield by gliding it on the wiper arm.