How to Service and Repair a Rear Engine Mount on 2009 Dodge Nitro?

You should disconnect the negative cable from the battery as a first step in dealing with the rear engine mount. Jack up the vehicle and hold the transmission carefully. Open up the nuts that connect the support cushion to the crossmember and finally remove the crossmember. For manual transmission, open the cushion screws, disconnect the bolts from the bracket and finally loosen the bracket to take it off the transmission. For an automatic transmission, remove the bolts that keep the support cushion attached to the transmission and you can then pull the cushion and the support bracket away for 4WD or the adaptor bracket for 2WD. In 2WD vehicles, take out the bolts that hold the transmission support adaptor bracket to the transmission, then remove the adaptor bracket.

OEM 2009 Dodge Nitro Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2009 Dodge Nitro Trans Crossmember Part Number: 52125442AD
$59.15 MSRP: $88.70
You Save: $29.55 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Transmission; Transmission Crossmember
- Replaces: 52125442AB, 52125442AA, 52125442AC
- Item Weight: 19.80 Pounds
- Item Dimensions: 36.8 x 7.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125442AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Front Insulator, Driver Side Part Number: 52129481AC
$189.36 MSRP: $279.00
You Save: $89.64 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Left Support Bracket; Torque Strut; Motor Mount; Mount Insulator; Mount; Insulator Engine Mount
- Position: Driver Side
- Replaces: 52129481AB, 52129481AA
- Item Weight: 4.20 Pounds
- Item Dimensions: 8.5 x 5.8 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129481AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Heat, SE, SLT, SXT | 6 Cyl 3.7 L GAS
View related parts
2009 Dodge Nitro Front Insulator, Driver Side Part Number: 52125107AD
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount
- Position: Driver Side
- Replaces: 52125107AC, 52125107AB
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125107AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Front Insulator, Passenger Side Part Number: 52129480AC
$180.15 MSRP: $269.00
You Save: $88.85 (34%)
Product Specifications
- Other Name: Insulator - Engine Mount; Right Support Bracket; Torque Strut; Motor Mount; Mount Insulator; Mount; Insulator Engine Mount
- Position: Passenger Side
- Replaces: 52129480AB, 52129480AA
- Item Weight: 4.30 Pounds
- Item Dimensions: 9.3 x 7.5 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129480AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Heat, SE, SLT, SXT | 6 Cyl 3.7 L GAS
View related parts
2009 Dodge Nitro Mount Bracket, Driver Side Part Number: 52125451AC
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Support Bracket, Left; Engine Mount Bracket; Motor Mount; Bracket Engine Mount
- Position: Driver Side
- Replaces: 52125451AA, 52125451AB
- Item Weight: 3.60 Pounds
- Item Dimensions: 9.3 x 8.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125451AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Mount Bracket, Passenger Side Part Number: 52125452AC
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Support Bracket, Right; Engine Mount Bracket; Motor Mount; Bracket Engine Mount
- Position: Passenger Side
- Replaces: 52125452AA, 52125452AB
- Item Weight: 3.50 Pounds
- Item Dimensions: 11.4 x 6.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125452AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Front Insulator, Passenger Side Part Number: 52125108AD
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount
- Position: Passenger Side
- Replaces: 52125108AC
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125108AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 6 Cyl 4.0 L GAS

2009 Dodge Nitro Engine Mount Parts and Q&A

Q: How to Service and Repair a Rear Engine Mount on 2009 Dodge Nitro?
A: You should disconnect the negative cable from the battery as a first step in dealing with the rear engine mount. Jack up the vehicle and hold the transmission carefully. Open up the nuts that connect the support cushion to the crossmember and finally remove the crossmember. For manual transmission, open the cushion screws, disconnect the bolts from the bracket and finally loosen the bracket to take it off the transmission. For an automatic transmission, remove the bolts that keep the support cushion attached to the transmission and you can then pull the cushion and the support bracket away for 4WD or the adaptor bracket for 2WD. In 2WD vehicles, take out the bolts that hold the transmission support adaptor bracket to the transmission, then remove the adaptor bracket.