How to Remove and Replace the Rear Brake Line on 2009 Dodge Ram 1500?

Place the brake line properly and attach the brake hose retainer clip bolt fixed to the frame at 20 Nm (15 ft. lbs.). After that, use two new washers and tighten the banjo bolt to 28 Nm (21 ft. lbs.). Route the antilock sensor harness into the white holder and note that the right brake line has three push type retainers while the left has one. Install the brake line retainer clip(s) and place the connector onto the end of that frame junction block, fastening it by hand until it reaches 19 Nm (169 in. lbs.). After you're done with the supports, let the vehicle down and remove the prop rod from the brake pedal. In the end, the repair area has to be bled; if the expected pedal feel is not felt after bleeding, a base bleed system must be performed.

OEM 2009 Dodge Ram 1500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
2009 Dodge Ram 1500 Flex Hose, Front Passenger Side Part Number: 55366894AJ
$44.21 MSRP: $65.80
You Save: $21.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; ABS Pressure Hose, Front Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 55366894AI, 55366894AC, 55366894AF, 55366894AH, 55366894AB, 55366894AD, 55366894AG, 55366894AE
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55366894AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 1500 Flex Hose, Rear Driver Side Part Number: 55398309AH
$48.71 MSRP: $72.45
You Save: $23.74 (33%)
ADD TO CART
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: 55398309AG, 55398309AF, 55398309AE
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.1 x 16.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55398309AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 1500 Flex Hose, Rear Passenger Side Part Number: 55398310AH
$56.14 MSRP: $83.50
You Save: $27.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube/Hose - Brake; Brake Hydraulic Hose, Rear Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Passenger Side
- Replaces: 55398310AG, 55398310AE, 55398310AF
- Item Weight: 0.80 Pounds
- Item Dimensions: 57.2 x 14.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55398310AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 1500 Flex Hose, Front Driver Side Part Number: 55366349AK
$38.42 MSRP: $56.95
You Save: $18.53 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Left, Front Left Outer; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaces: 55366349AH, 55366349AI, 55366349AC, 55366349AE, 55366349AJ, 55366349AD, 55366349AF
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55366349AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 1500 Flex Hose, Front Passenger Side Part Number: 55366348AL
$42.68 MSRP: $64.35
You Save: $21.67 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Right, Front Right Outer; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 55366348AI, 55366348AK, 55366348AD, 55366348AC, 55366348AJ, 55366348AF, 55366348AE
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55366348AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 1500 Flex Hose, Front Driver Side Part Number: 55366893AJ
$45.73 MSRP: $68.05
You Save: $22.32 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Front Left Outer; ABS Pressure Hose, Front Left; Brake Line
- Position: Front Driver Side
- Replaces: 55366893AD, 55366893AF, 55366893AE, 55366893AH, 55366893AG, 55366893AI, 55366893AB, 55366893AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55366893AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Dodge Ram 1500 Brake Line Parts and Q&A

Q: How to Remove and Replace the Rear Brake Line on 2009 Dodge Ram 1500?
A: Place the brake line properly and attach the brake hose retainer clip bolt fixed to the frame at 20 Nm (15 ft. lbs.). After that, use two new washers and tighten the banjo bolt to 28 Nm (21 ft. lbs.). Route the antilock sensor harness into the white holder and note that the right brake line has three push type retainers while the left has one. Install the brake line retainer clip(s) and place the connector onto the end of that frame junction block, fastening it by hand until it reaches 19 Nm (169 in. lbs.). After you're done with the supports, let the vehicle down and remove the prop rod from the brake pedal. In the end, the repair area has to be bled; if the expected pedal feel is not felt after bleeding, a base bleed system must be performed.