How to Remove a Front Crankshaft Seal on 2009 Dodge Ram 1500?

The first step is to remove the negative cable connected to the battery before removing the front crankshaft seal. After that, take out the accessory drive belt. After you remove the bulbs and bending strip, get rid of the A/C compressor mounting bolts and put the compressor aside. Drain your cooling system and get the upper radiator hose off the car. Take the electrical connector out of the fan by the radiator shroud and remove all the fasteners holding the shroud in place, since the transmission cooler line is pulled into the shroud in its right-hand corner. Then, remove the radiator cooling fan and its shroud. Take off the crankshaft damper bolt and, using Crankshaft Insert 8513A and 1023 Three Jaw Puller, remove the damper. In the end, apply Crankshaft Front Seal Remover 8511 to help you remove the crankshaft front seal.

OEM 2009 Dodge Ram 1500 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2009 Dodge Ram 1500 Oil Seal, Front Part Number: 53021313AA
$10.10 MSRP: $14.85
You Save: $4.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2009 Dodge Ram 1500 Oil Seal, Front Part Number: 53021585AD
$24.52 MSRP: $36.25
You Save: $11.73 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Front Engine Crankshaft Seal; Timing Cover Seal; Gasket; Crankshaft Seal; Front Seal included with Long Block Engine Install Kit.
- Position: Front
- Replaces: 53021585AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021585AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 1500 Rear Main Seal Part Number: 53020788AB
$32.91 MSRP: $48.75
You Save: $15.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2009 Dodge Ram 1500 Rear Main Seal Part Number: 53021335AE
$94.83 MSRP: $142.00
You Save: $47.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal, Rear; Rear Main Seal Retainer; Crankshaft Rear Oil Seal not included with Long Block Engine Install Kit.
- Position: Rear
- Replaces: 53021335AD, 53021338AB, 68017721AA, 53021335BA, 53021335AC, 68060342AA, 5140028AA
- Item Weight: 3.10 Pounds
- Item Dimensions: 1.3 x 10.2 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021335AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS

2009 Dodge Ram 1500 Crankshaft Seal Parts and Q&A

Q: How to Remove a Front Crankshaft Seal on 2009 Dodge Ram 1500?
A: The first step is to remove the negative cable connected to the battery before removing the front crankshaft seal. After that, take out the accessory drive belt. After you remove the bulbs and bending strip, get rid of the A/C compressor mounting bolts and put the compressor aside. Drain your cooling system and get the upper radiator hose off the car. Take the electrical connector out of the fan by the radiator shroud and remove all the fasteners holding the shroud in place, since the transmission cooler line is pulled into the shroud in its right-hand corner. Then, remove the radiator cooling fan and its shroud. Take off the crankshaft damper bolt and, using Crankshaft Insert 8513A and 1023 Three Jaw Puller, remove the damper. In the end, apply Crankshaft Front Seal Remover 8511 to help you remove the crankshaft front seal.